Mid Xinxing Road, Gongyi City, Zhengzhou, Henan, China, Zhengzhou, Henan
现在联系
详情
Areated Concrete Block Machine
1. Introduction
Areated concrete block is the light and porous building material.
The concrete block product is characterized by the advantages of
light weight, heat preservation, sound isolation, high strength,
processable property and so on. It can be made into many kinds of
bricks or boards according to different uses. They could be used in
industry building and common building. They are more and more
popular in the world.
2. Areated concrete common conception
Common concrete density is usually ********0kg/m³, but Areated
concrete are **0kg/m³, **0kg/m³, ***0kg/m³,
***0kg/m³.
3. Advantages of the product
1). Light weight
2). Heat preservation
3). Sound isolation
4). Save manpower
5). Resist compression and fireproof
6). Good processable property.
4. Main Features of the Machine:
1)The structure of the machine is simple and practical, it is easy
to install and maintain.
2) After overturning, the blank stands vertically with the width of
*0mm and the height of ***0mm, thus the cutting wire can be shorter
and it is not easy to be broken and drifted, the cutting precision
can be more exactly as well.
3) When the blank is moving along with the cutting cart, the
vertical cutting is done by the vertical cutting device which is
fixed. The horizontal cross cutting device is driven by the chain
which can keep the cross cutting support running consistently when
it is rising or falling, thus it can ensure the cutting
precision.
4) As the blank stands vertically, the grooves on both sides of the
blank (with width of **0mm )can be milled at the same time when the
blank is cut vertically, no groove processing device is
needed;
5) The machine can produce both building blocks and slabs and the
blank can be cut into six sides, therefore the quality of products
can not be influenced by the mould oil and the deformation of the
mould;
6) The machine is easy to operate. The cutting process of the
machine (overturning, vertical cutting and cross cutting ) can
be finished in different positions, therefore the operation is
simplified and the maintenance is convenient.
