详情
On/off FCU Two wired Motorized Valve BMV**2
General BMV**1 Motorized Valves are made of Actuator and Valve
Body.The valve is closed,configurations of valve body are closed
off;the thermostat (NTC) transfers a signalto actuator that will
connect to power,and then open valve,input hot water or chill water
to fan coil unit,if the room temperaure reaches to
set-point,thermostat transfers a signal to actuator to cut off the
power,and spring switch returns, valves is closed,and the hot or
chill water is block to fan coil unit. Therefore,the room
temperature could be controlled in the set-point through valve
opened or closed.The connect type is screw between actuator and
valve body.We could install the body firstly,and then actuator.
BMV**2 series are smart,everlasting,less noise,less space and able
to work under high temperature environment.
Product Feature
Technical Data Power Consumption:< =*0 m A. Sensor : NTC.
Accuracy: ±0.5 degree C. Temperature Range: ***5 degree C. Shell
Material: Importing Anti-flaming PC/ABS. Dimensions: **5mm X*0mm X
*8mm. Output: Wireless remote control Relay.
Product Specification/Models
BMV**2
Application
Applicable A. Put the ball valve installed in the horizontal pipe
above the center line or with the centerline. B. In order to reduce
the heat conduction of steam or other occasions, should ensure that
there is sufficient space for actuator disassembly. C. When Install
the electric actuators, the first turn with the wrench to stem
several times to eliminate the torque that long-term storage has
made. D. A port should be the port which flow into. E. Prevent the
water or steam into the actuator.
Payment
TT
Delivery
*5 days after deposit
Origin
China
Minimum Order
**0pcs
Packaging
Box
Inspection
CE
Samples
Charge
Remarks
Please contact with us for more detail.
OK
