Sell 1400 mm 12 roll single stand Reversing cold rolling machine

详情

***0 mm*2 roll single stand
Reversing cold rolling machine
Mill technical indicators
1. The unit USES
Used in the production of cold rolled galvanized substrate, tin base board, and other precision cold-rolled strip, etc.
2. The unit specification parameters
2.1 the main rolling mill main technical parameters
Mill: the twelve high single hydraulic reversing cold rolling mill
Work roll size: **0 ~ **0 x ***0 mm Φ Φ
Material: 9 cr2mov
Intermediate roll size: **5 ~ **5 x ***0 mm Φ Φ
Material: 9 cr2mo
The main rolling mill drive motor power: ***0 KW x 2 Z******0
The maximum rolling pressure: ****0 KN
Speed: **0 m/min or less
Speed accuracy: steady state: plus or minus 0.1%
2.2 the unit works: reversible rolling in rolls
2.3 accurate parking accuracy: *0 mm or less
2.4 processing lubrication: emulsion system
3. The mill capacity calculation:
3.1. The material condition
The raw materials for production line of hot-rolled coil, specific parameters are as follows:
Thickness: 2.0 ~ 3.5 mm
Width: **0 ~ ***0 mm
Coil diameter, inside diameter: **5 ~ **0 mm Φ Φ
: (Max) Φ ***0 mm outer diameter
Volume weight (Max) and t
Unit volume weight (Max) *8 kg/mm (on average) *6 kg/mm
Mechanical properties: maximum yield limit the delta acuities were **0 mpa
Steel types: general carbon, carbon, low alloy, a guitar, carbon steel workers, electricians
According to the stamping are rated: CQ, DQ, DDQ, HSLA
On behalf of the steel grade: (SPCC)/st*2, SPCD/st*3; Q**5 - Q**5;
SPHC and silicon steel (no orientation), etc
3.2 product solutions (see product calculation table)
Thickness: 0.*5 ~ 0.5 mm
Width: **0 ~ ***0 mm
Product standards: GB/T*******8, GB/T*********9, GB/T********1, GB/T*********1, JIS G ********6 and other relevant international standards
3.3 production: ****0 ~ *****0 tons