DC5-25V Small 360degree passive infrared pir motion sensor.led module

详情

**0 degree proximity led module
1.DC***5v pir sensor
2.infrared led module
3.ir led module
4.long distance led module

*2v pir sensor
 

Description 

PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Operating voltage is 5~*5VDC, and output voltage is equal to input voltage. High sensitivity, easy for installing. Widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more.

Specification

Functions and Features

1.Automatic Induction: When people enter into the range of induction, it will output a voltage equal to input voltage, after the delay time, it will output 0V; during the delay time if motion detected, the delay time will reset, and start a new delay time.
2.Light sensor control function(for BS**0L):It will trigger only in the darkness when environment brightness less than *0lux, otherwise, it’s will not triggered even motion detected.

 Note:

1.Don't exposed to direct sun light or lighting, big wind, near a heater or air condition.
2.Don't fix it at a place where there are obstructing material (eg. Glass, dense clothes) which IR cannot get though.
3.Don't fix it in strong shock or vibration environment.
4.The PIR Sensor requires a 'warm-up' time in order to function properly, about *0s to1min,depend on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.
5.The sensitivity for left-right direction is better than up-down direction, make sure the installation direction is left-right.