离岸价格
获取最新报价0 ~ 3.6
|Minimum Order
位置:
Shanghai
最小订单价格:
-
最小订单:
2000 Piece
包装细节:
310ml , 400ml, 600ml
交货时间:
2weeks
供应能力:
7000 Ton per Year
付款方式:
T/T, L/C, PayPal
联系人 Ms. Sally
No. 1129, Denghui Road, Minhang District, Shanghai, China (Mainland), Shanghai, Shanghai
PU ***0 is one Component PU Adhesive and Sealant for Auto Repair market.
Features
1. Bond very well with surface of variety material with good cohesive force and durable elastic sealing performance
2. One component adhesive with fabulous thixotropy and rapid curing
3. Excellent water, weather and aging resistance
4. Excellent wear-resisting property, high tear strength
5. Paintable and polishable
6. No sag or flow phenomena within *0mm perpends
7. Primer required
Usage
1. Specially used for auto glass.
2. Also use for SMC and plastic accessories (car roof, side body and car front)
3. For bonding different material such as all kinds of metal, lumber, glass, polyurethane, epoxy resin, PU and coating material, etc
Data Table
Model Number |
PU ***0 |
Main Raw Material |
Polyurethane |
Color |
Black paste |
Density |
1.*5±0.*5Gr/cc |
Sagging |
0mm |
Volatile content |
≤4% |
Extrudability |
≥*0ml/min |
Touch dry time |
****0Min |
Curing speed |
**5Mm/*4hrs |
Shore A-hardness |
*1±3ShoreA |
Tensile strength |
≥4N/mm2 |
Elongation at break |
≥**0% |
Application temperature |
5~*5°C |
Note:
1. All data above ware tested under standardized condition.
2 .All data listed in the chart were for rhe generalized item in the series; please refer to the related datasheet for special items.
3 .Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.
Operation
Clean before operation
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
Direction of operation
Tool:Manual or pneumatic plunger caulking gun
For cartridge
1.Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength
For sausage
1.Clip the end of the sausage and place in barrel gun
2.Screw end cap and nozzle on to barrel gun
3.Using the trigger extrude the sealant with equal strength
Attention of operation
Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accident or if you feel unwell, seek medical advice immediately
Safety Operation Material
MSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or call ***************3.
Product Warranty
All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents