Sell Channel-type Vehicle Radioactive Automatic Monitor System

详情

Overview

BSRPM******2 channel-type vehicle radioactive automatic monitor system is the radioactive automatic monitor system which configures two large-volume, high-sensitivity gamma-ray detectors. It can real-time detect the passing through vehicles, find traces of the radioactive materials, output the alarm and store the test data. The system can also network with the upper management systems at the same time, which will constitute a remote real-time detection information system. The systems are widely used in some places’ entrances, exits& channels, such as Customs, ports, even some metal recovery and smelting enterprises use the system to detect the small/medium trucks& cargo to see whether taking the radioactive materials

Technical Parameters

lDetector: 2 plastic scintillators (***0mm***0mm**0mm) + double low-noise photomultiplier tubes, a single crystal sensitive with the volume of *0 liters. With 3mm lead (5 faces) which will screen the interference of the background, and every detector weighs about **0kg (detector+ dos shell);

lDetection ofγ-rays and x-ray, energy range of *5keV ~ 3MeV;

lController signal processing unit: **-bit embedded ARM9 processor;

lMonitoring area coverage: height ≤4m; width≤5m;(BSRPM******2 series);

lAlarm: Sound alarm& light alarm (the alarm can distinguish the alarms between radiation and over-speed), adjustable of the alarm thresholds, the alarm can be connected to a remote management computer with a special back-management software;

lBack-up battery: Lead-acid battery, which can work 4 hours after power off (Not including the management computer system);

lThe management computer system can record the traffic, the alarm data, capture images, automatically print the reports& network with the upper management.

lWork environment: Temperature: **0°C~**0°C;

                                      Humidity: Less than *5% (No condensation);

lThe main supply voltage range ******0VAC, *0—*0Hz(less than 1A);

lInstallation categoryII (voltage level should follow the provisions of IEC*****1).

Application Field

Ports, terminals, scrap metal transportation bases, air ports, Customs, others and so on.