详情
The TM series flow meters are mini oval gear flow meter, can
measure from 0.*2 GPM (0,1 LPM) up to *0 GPM (*6 LPM) in its
different models. The TM series flow meters have inlet/outlet sizes
from ¼”, 3/8”, ½” and ¾”, anodized aluminum or stainless steel
body, low drop pressure aprox. 3,5 PSI (0,2 BAR), without metal to
metal contact inside the measuring chamber, with a lot of
electronics registers options. The TM series is specially used for
additive injection service, low flow industrial process, fuel
consumption systems, monitoring flow lubricants to critical bearing
in rotating equipment, small volume batching, etc. Repeatability:
+/- 0.*5%. Linearity: + / - 0.5% (0.*5% with Electronic
improvement). Anodized aluminum or Stainless Steel body. Maximum
pressure allowable of **6; 1,**3 y 2,**0 PSI at **0°F (*8; **3 y
**3 Bar at *8°C) depending on models (Safety Factor 3:1).
Approvals: CE mark, UL, cUL y ATEX. Operating Temperature Range:
**0°F to **2°F (**0°C to **0°C). Range of measurement as models:
0.3GPM; 3GPM; *0 GPM and *0GPM for 1cSt (1,1 LPM; *1,4 LPM; *8LPM y
*6 LPM). Connection options: NPT, BSP, ANSI **0 floating flange.
Electronic flow meter sensor option: Hall Effect, Quadrature Hall
Effect or Reed Switch. Seals: Viton or Teflon. The TS series flow
meters are a kind of oval gear flow meter. All models are NTEP
certificated for Custody Transfer service in US (knew than NIST
before). The meters can measure from 4 GPM (*5 LPM) up to **4 GPM
(1,**0 LPM) in its different models. The TS series flow meters have
inlet/outlet sizes from ¾”; 1”; 1,5”; 2” and 3”, anodized aluminum
or stainless steel body, without metal to metal contact inside the
measuring chamber and it is available in several configuration
variety that include strainer, air eliminator, preset valve,
mechanics register, electronic registers and so on. With only two
moving parts has exceptional low drop pressure characteristic
aprox. 0,*7 - 0,*7 PSI (2,5 - 4 BAR). Repeatability: +/- 0.*5%.
Linearity: + / - 0.*5%. Anodized aluminum or Stainless Steel body.
Maximum pressure allowable of **0; **0 and **0 PSI at **4°F (*0; *4
and *8 Bar at *0°C) depending on models (Safety Factor 3:1).
Approvals: Custody Transfer NTEP, CE mark, UL, cUL y ATEX.
Operating Temperature Range: **0°F to **2°F (**0°C to **0°C). Range
of measurement as models: *0 GPM; *0 GPM; **0 GPM, **0 GPM and **0
GPM for 1.**0 SSU (**0 LPM; **0 LPM; **0 LPM, **0 LPM and 1,**0 LPM
for **0 cP). Connection options: NPT, BSP, ANSI **0 flange.
Electronic flow meter sensor option: Hall Effect, Quadrature Hall
Effect. Mechanics meter with pulse output optional. Seals: Viton or
Teflon.
