详情
1.
Use.
As the preparatory cleaner, the machine is located between the bale
plucker and the multi-mixer. It’s used to evenly and densely beat
raw materials in freedom several several times, to remove bigger
trashes, and to flexibly open raw materials so as to avoid the
fiber damage.
2.
Characteristics
a. Equipped with a microfiber extraction device (suction mouth)
inside the machine to efficiently control the increase of short
fibers (at the rear upper side of roller there equipped with a mesh
plate and suction pipes).
b. Adopt V-shaped beaters to freely beat materials5.5 circles, then
output them and meanwhile remove bigger trashes
.
c. Adopt four groups of grid bars A, B, C, D, with angle
adjustable; with the setting angle changing from small to big, the
droppings will increase to get high trash extraction.
d. The droppings output is composed of droppings carriage, leather
flap roller, output motor and the clear sequence control
program.
e. Adopt the transmission of frequency control for the V-shaped
beater, and the speed can be adjusted among******0rpm according to
technology requirements.
3. Technical
parameters
Production
≤**0kg/h,
width1.6m
Spiked roller size: dia.**0x***4, speed; mechanical adjusting**6,
**2, **5rpm frequency control normally ******0rpm,
generally**0rpm
Dust bar type: *8pcs
Setting: 5.***1mm Setting angle:5
°**0
°
The main motor: Y**2M*4 7.5Kw, ***0 rpm,
The carriage motor: BWDO**0.*7Kw ***0rpm
Overall size(mm): ***2x***2x***0 (LXWXH)
