12x1 channel rf remote control switch relay

详情

This 1 channel DC RF wireless remote control system can used to control lights, motor, fans, electrically operated doors/locks blinds or other appliances automatically. It is easy to install and use. The remote control switch has *2 buttons, and works with toggle, momentary  2 control modes. Its control distance is about ***0 meters away. It should be a good choice for you. Just take it away!

Note: Customized design is acceptable, we have professional technology-support!
if you want  more than one transmitter or receiver , please contact us

Feature:

• Wireless control, easy to install

• Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC **0~**0V or DC 0~*8V.

• You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.

• With characteristics of over current protection, short-circuit protection and temperature protection.

• Audible / visual indication

• Use microcontroller model of EM*8P**6, an *-bit microprocessor designed and developed with low-power and high-speed CMOS technology.

• Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an *-bit code.

• One/several transmitters can control one/several receivers simultaneously.

• If you use two or more receivers in the same place, you can set them with different codes.

• Transmitting Frequency: The default frequency is **5MHz ,we can also provide **3MHz, you can leave us a message or contact us if you need.
   

Receiver:

• Model No.: M*-DC*2

• Channel: 1 CH

• Control Modes: Toggle, Momentary,latched

• Coding Type: Fixed code

• Coding Setting: By learning

• Power Supply (Operating Voltage): DC*2V±1V (M*-DC*2),we can also provide DC*9V or DC*4V,please contact us if you need.

• Working Voltage Range of Relay: AC **0~**0V or DC 0~*8V

• PCB size: *4mm x*3mm x *9mm

• Case size: *4mm x *8mm x *7mm

• Maximum Working Current: *0A
   

Transmitter:

• Model No.: HR**2

• Channel: *2 CH

• Remote Control Distance: ***0m / ***0ft (theoretically)

• Encode: Fixed code by Soldering

• Unit size: **5mm x *4mm x *5mm

• Power Supply:1 x 6F*2 *9V battery  (included, can be used for *2 months)

Usage:

• Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as following operation):

• Setting control mode Toggle: Only connect B (on the back of pcb)..
  Setting control mode Toggle: Only connect Jumper*2.
  Control mode Toggle: Press -> On; Press again -> Off.
  Press button 1: Turn on the relay (connect B and C, disconnect A and B)
  Press button 1 again: Turn off the relay (disconnect B and C, connect A and B)

• Setting control mode Momentary: Only connect Jumper*1.
  Control mode Momentary: Press and hold -> On; Release -> Off.
  Press and hold button 1: Turn on the relay (connect B and C, disconnect A and B)
  Release button 1: Turn off the relay (disconnect B and C, connect A and B)

• Setting control mode Latched: Do not connect Jumper*1 and Jumper*2.
  Control mode Latched: Press -> On, another relay Off; Press another button -> Off.
  Press button 1: Turn on the relay (connect B and C, disconnect A and B)
  Press button 2: Turn off the relay (disconnect B and C, connect A and B)
   

Package included:

• *2 x Receiver: M*-DC*2 (1 Channel / Three Control Modes)

• 1 x Transmitter: HR**2

• 1 x User manual