Note:
Customized design is acceptable, we have professional
technology-support!
Package
included:
1 x Receiver:
MOT*-DC
1x Transmitter:
HR6
1 x User manual
Feature:
Wireless control, easy to
install
Control
Lights, Motors, Fans, electrically operated
Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC
**0~**0V or DC 0~*8V.
You can turn on/off the receiver with transmitter (remote
control) from any place within a reliable distance; the wireless RF
signal can pass through walls, floors and doors.
With characteristics of over current protection, short-circuit
protection and temperature protection.
Audible /
visual indication
Use
microcontroller model of EM*8P**6, an *-bit microprocessor designed
and developed with low-power and high-speed CMOS
technology.
Reliable control: The transmitter (Encoding) and the receiver
(Decoding) use an *-bit code.
One/several transmitters can control one/several receivers
simultaneously.
If you use two or more receivers in the same place, you can set
them with different codes.
Transmitting Frequency: The default frequency is **5MHz
,we can also provide **3MHz, you can leave
us a message or contact us if you need.
Receiver:
Model No.: MOT*-DC
Channel: That can control two motor Forward and Reversion
Control Modes: Momentary
Coding Type: Fixed code
Coding Setting: By learning
Power Supply (Operating Voltage): DC*2V, we can also provide
DC*9V or DC*4V,please contact us if you need.
Working Voltage Range of Relay: AC **0~**0V or DC 0~*8V
PCB size: *4mm x *3mm x *0mm
Case size: **0mm x *0mm x *0mm
Maximum Working
Current: *0A
Transmitter:
Model No.: H6
Channel: 6 CH
Remote Control Distance:
***0m / ***0ft (theoretically)
Encode: Fixed code by
Soldering
Unit size: **5mm x *4mm x
*5mm
Power Supply: 1 x 6F*2 *9V
battery (included, can be used for *2 months)
Usage: control
modes Control
modes : Setting different control modes
(We have set the receiver as Latched mode before delivery. If you
want to use other modes, do as following):
Setting control mode Momentary:
Only connect Jumper*1. Motor1: Press and hold on button 1: the
motor 1 Forward. Release button 1, the motor 1 stop. Press and hold on button 3: the
motor 1 reverse. Release button 3, the motor 1 stop. Motor2: Press and hold on button 2: the
motor 2 Forward. Release button 2, the motor 2 stop. Press and hold on button 4: the
motor 2 reverse. Release button4, the motor 2 stop.
Setting control mode Momentary +
Toggle: Connect Jumper*1 and Jumper*2. Motor1: (Momentary) Press and hold on button 1: the
motor 1 Forward. Release button 1, the motor 1 stop. Press and hold on button 3: the
motor 1 reverse. Release button 3, the motor 1 stop. Motor2: (Toggle) Press button 2: the motor 2
Forward. press button 6, the motor 2 stop. Press button 4: the motor 2
reverse. press button 6, the motor 2 stop.
Setting control mode Latched: Do
not connect Jumper*1 and Jumper*2. Motor1: Press button 1: the motor 1
Forward. press button 5, the motor 1 stop. Press button 3: the motor 1
reverse. press button 5, the motor 1 stop. Press button 1: the motor 1
Forward. press button 3, the motor 1 reverse. press button 5, the
motor 1 stop. Motor2: Press button 2: the motor 2
Forward. press button 6, the motor 2 stop. Press button 4: the motor 2
reverse. press button 6, the motor 2 stop. Press button 2: the motor 2
Forward. press button 4, the motor 2 reverse. press button 6, the
motor 2 stop.
Setting control mode Toggle: Only
connect Jumper*2. Motor1: Press button 1: the motor 1
Forward. press button 5, the motor 1 stop. Press button 3: the motor 1
reverse. press button 5, the motor 1 stop. Motor2: Press button 2: the motor 2
Forward. press button 6, the motor 2 stop. Press button 4: the motor 2
reverse. press button 6, the motor 2 stop..
Learning the button
of remote control:
1) Press the button of receiver; signal LED on the receiver keeps
shining. The receiver enters into status of LEARNING.
2) Press any one button on remote control. If signal LED flashes
quickly *5 times and turns off, it means learning is
successful.
3) When receiver is in the status of LEARNING, press again the
button of receiver, signal LED turns off, learning process will be
discontinued.
4) The receiver can learn several remote controls with different
codes.
