Coated with acrylic,High tensile, High
self-adhesive, now the products are sold well to Europe, Middle
east, Southeast Asian and South Americian, Etc.
Direction of Application 1
wall must be clean and dry 2
center and apply tape over the length of the joint, pressing
firmly. 3
Apply a generous first coat of compound over the tape and through
the mesh,making sure to completely fill the joint
crevice 4 let
dry completely then sand slightly 5
apply sufficient thin finishing coats to produce a small wall
surface. 6 cut
or butted boards do not have a tapered edge, special care must be
taken to assure proper compound penetration of all joints, this may
result in slight build-up of compound that will require an
increased amount of edge feathering
