Sell FIRA PRIMER Building and Construction

详情

DESCRIPTION

 Acrylic emulsion based, special undercoating paint formulized to increase the adherence of the putty-consistency acrylic based decorative materials to the surface.

APPLICATION : Fira Primer is used as undercoating for acrylic based decorative coating materials applied on all kinds of mineral surfaces like concrete, aerated concrete, pressed bricks or thin plaster, gypsum plaster.

FEATURES:
Creates a rough face on the surface.
  Adheres very well to the surface and lays the ground for other decorative materials to be applied.
It is highly covering.
Water-based, odor-free;harmless to human health and environment.

SURFACE PREPARATION

·        Clean all dirt, oil, blistered paint and dust off the application surface; level the surface defects, if any.

APPLICATION INSTRUCTIONS

·        Mix FIRA PRIMER well prior to application.

·        Prior to application, Dilute FIRE PRIMER with ****0% fresh water and mix mechanically until homogenous, and then apply in one coat with roller.

DRYING TIME:

 The contact time is **3 hours, and thorough-dry time is *4 hours in environment of *3oC.

PACKING: 2.5 L

CONSUMPTION:

Depending on surface smoothness and application methods, for single coat application:

FLASH POINT:

Water based, non-flammable.

STORAGE:

 Store in enclosed packaging for 1 year between *5oC to **0oC

WARNINGS:

 Keep away from places where children can reach. Avoid eye and skin contact.