Sell CRAFT PLAS Interior Wall Paint/Coating

详情

DESCRIPTION

Acrylic emulsion based, matt final coat decorative interior paint.

APPLICATION

 

Craft Plas is applied on properly prepared interior mineral surfaces like rough cast, concrete, cement sheet, plaster panel and old painted surfaces with suitable undercoating.

FEATURES

Resistant to wiping, and easily cleaned.

 Thanks to its high vapour permeability, it enables the vapour to be thrown out and lets the surface breathe.

Strong covering.

Water-based, odor-free; harmless to human health and environment.

SURFACE PREPARATION

Clean all dirt, oil, blistered paint and dust off the application surface; level the surface defects with FIRACOLOR ACRYLIC PUTTY THİN. 

APPLICATION INSTRUCTIONS

Surfaces with old paint or surfaces that will be painted must be undercoated with FIRACOLOR UNIFIRA.

CRAFT PLAS must be mixed well prior to application.

Prior to application, CRAFT PLAS must be diluted with *0% fresh water maximum  and applied in 2 coats with roll, brush or spraying method. Minimum 5 hours wait time must be placed between coats.

The environment of application must be kept above *5 ˚ C within *4 hours during and after the application.

DRYING TIME: The contact timeis **6 hours, and thorough-dry time is *4 hours in environment of *3oC.

PACKING: 2,5 L– 7,5 L – *5 L

CONSUMPTION:  Depending on surface smoothness and application methods, for single coat application:

FLASH POINT:  Water-based, non-flammable

STORAGE: Store in enclosed packaging for 1 year between *5oC to **0oC