离岸价格
获取最新报价( Negotiable )
|Minimum Order
位置:
Turkey
最小订单价格:
-
最小订单:
250 Kilogram
包装细节:
25 Kg
交货时间:
20 to 25 days
供应能力:
-
付款方式:
T/T, L/C, Western Union
联系人 Ms. Sebnem
Kucukbakkalkoy Mah. Yenidogan Cad. Hazar Sk. No:4 Atasehi, Istanbul, Other
DESCRIPTION
Acrylic emulsion based, long life side coating.
APPLICATION
Designtex Base is used on all kinds of buildings, on plaster, exposed concrete, bricks, wood, briquette, eternit and undercoated metal surfaces and on exterior surface insulation systems with proper undercoating.
FEATURES
Elastic, serving as a bridge for the cracks on the application surface, not affected by the cracks that might occur due to building subsidence.
Covers up the faults on the surface with the thick layer of film that forms during application.
Resistant to alkaline.
Not affected from external factors, and weather conditions like rain, snow, humidity, extreme hot or cold and its colours do not fade.
Thanks to its vapour permeability, enables the vapour to be thrown out and lets the surface breathe.
Water-based, odor-free; harmless to human health and environment
SURFACE PREPARATION
Clean all dirt, oil, blistered paint and dust off the application surface; level the surface defects with FIRACOLOR ACRYLIC PUTTY THİCK
Previously painted surfaces, or surfaces that will be painted must be undercoated with FIRACOLOR UNIFIRA. We recommend using the same color of undercoat as the selected siding colour.
APPLICATION INSTRUCTIONS
Mix DESIGNTEX BASE until it achieves a homogenous consistency.
Prior to application, dilute DESIGNTEX BASE with ***0% water and apply to the surface with roller. Apply the desired pattern with sponge roll.
If you prefer a thick pattern, apply without diluting.
Wait **-hours to dry, then apply DESIGNTEX FINISH in the desired colours as the final coat.
The environment of application must be kept above *5 ˚ C within *4 hours during and after the application.
DRYING TIME: The contact timeis **6 hours, and thorough-dry time is *4 hours in environment of *3oC.
PACKING: *5 kg
CONSUMPTION: Depending on surface smoothness and application methods, for single coat application:
Fine Pattern = 1.2 - 1.5 kg/m²
Coarse Pattern = 1.5 - 2 kg/m²
|
FLASH POINT: Water-based, non-flammable
STORAGE: Store in enclosed packaging for 1 year between *5oC to **0oC
WARNINGS: Keep away from places where children can reach. Avoid eye and skin contact.