离岸价格
获取最新报价|
Minimum Order
位置:
-
最小订单价格:
-
最小订单:
-
包装细节:
-
交货时间:
-
供应能力:
-
付款方式:
-
联系人 Rebekah
Dalang street, Shenzhen, Guangdong
| Silicone Conductive coating | |||||
| Model No.: PD******4AB | PD****3AB | PD*****-AB | PD******6HD-AB | PD******6AB... | |||||
| Method of application: | |||||
|
• Mix AB agent
thoroughly until completely combined. • Using the mixer fully stirring for 5 to *0 minutes. • Before coating, it will be filtered once through a ******0 holes filter screen. • The mixing ink of effective operating time is 6 hours. • When the ink is used, room temperature should be controlled at *2C approximately, and ensure constant temperature and humidity. |
|||||
| Vulcanization conditions: | |||||
|
• Vertical oven:
**0C, *0 minutes • LR conveyer belt: **0C, 7 minutes |
|||||
| Tips: | |||||
|
• Because of the
character of volatile solvent, when using the coating ink, please
pay attention to ventilation, and keep away from flame and
heat. • Avoid long time contacting with skin. After the vapor is inhaled or contact with the skin, wash immediately with plenty of soap-suds. • Storage period: 6 moths at normal temperature without any catalysts being added. |
|||||
| Application: | |||||
| It is a kind of double fluid heating curing coating conductive inks, with stable resistance value, excellent adhesion, good abrasion resistance, bright appearance, high tearing strength, etc, especially used in silicone rubber cable accessories, such as composite insulator, lightning arrester, and so on. | |||||
| >>> Typical Properties Data | |||||
| Model No. |
Resistance value KΩ |
Ratio A:B |
Specific Gravity *5°C |
Punctur voltage |
Application |
| PD******4AB | 1~3 | **0:1 | 1.*1 | *6 | Small value resistance, moderate black |
| PD****3AB | 5±1 | 1:1 | 1.*3 | *0 | Double components coating |
| PD******5AB | 4±1 | 1:1 | **3 | *0 | High temperature and double components coating |
| PD******6HD-AB | 4±1 | **0:1 | 1.*5 | *6 | Low temperature coating |
| PD******6AB | 4±1 | 1:1 | 1.*3 | *0 | High temperature and double components coating |
| PD********1AB | 4±1 | 1:1 | 1.*3 | *0 | High temperature and double components coating |
| PD****3D-AB | |||||
