Autmatic High-speed water-based Printing Slotting Die-cutting Machine

详情

STACKER
 

1. Auto or manual for stacker system control.
2. The driving belt of connection arm can adjust the elasticity alone and can choose the number of connection arm as will
3. Platform elevator is drive by strong thread.
4. Height up to ***0mm
5. Platform, elevator with brake control device to keep stable in fixed position and antislipping.
6. Pneumatic paper bearing board assist the circle receiving device.
7. Manual adjustment the position of back block.
8. The plane wrinkle leather belt which prevent the cardboard glides down.

1. Lead edge feeder system. inverter adjust air volume, feeding is precision and steady.
2. Double feeding roller model. quick replacement mechanism for the first feeding rubber roller, with air-operator adjustment function, the top feeding cylinder coated abrasion proof rubber to keep the cardboard from distortion.’
3. brusher and suction device remove dust from board surface.
4. Touch screen displays production speed and quantity.
5. Adjust the feed interval by manual

1. Both printing cylinder and impression cylinder are made of high quality steel with grounding surface and chrome plated. Dynamic and static balance correction  ensure to run stability.
2. Adopt hanging structure, convenience and fast to set up.
3. Installing and uninstalling printing plate with pedal switch or operation panel to control forward and reverse.
4. To match with feeding unit the machine with automatic lift anilox, when the feeding unit runs, the anilox roller goes down to contact with printing plate, while, on contract, leave printing plate.
5. Printing roller with intelligent zeroing function and can reset in dynamic and static condition.
6. Printing phase adopt PLC touch screen and **0 degree electric number adjustment.

1. The slot knife thickness is 7 millimeter, which is from high quality alloy, tooth profile in sharp cutting, high wearable.
2. The slot knife with phasing and box height adjustment device, the frequency changer control the dynamic **0 degree adjustment/
3. The slot knife seat lateral movement uses the electric control, in fast and accurate.
4. Regards the user’s need it can match the punch device.
5. Slot department add prepress wheel to improve the cardboard resistant to compression ability.
6. Spring type single slitting knife with glabrous slitting effect and cost saving.

1. Die cut unit roller adopt high quality steel, plated with rigid chrome. High precision dynamic and static balance increase running stable.
2. Mould roller and rubber roller can auto separate by cylinder eccentric device when the machine don’t die cut, this can lighten machine load and increase rubber roller and die knife life.
3. Matching with feeding system, it with auto up and down device, the mould roller will up when feeding paper, the mould roller will down when stop feeding paper. To make sure every paper die cut correctly.
4. The mechanical transmission rubber roller move *0mm in left and right side. It also with wear and tear regular could increase the life of rubber roller.
5. Die cut phase adopt PLC touch screen, **0 degree adjust electric number.
6. Machine with rubber amend device, the rubber roller can be used after many times amend.
7. Free die mould slotting unit, no need to make the die mould when making normal box, saving cost and improved efficiency.