详情
Features:
• Pure sine wave
output, available for sensitive
load
• Low Frequency
Inverter
• Inbuilt pure
copper transformer
• *-step
progressive charging, 7 battery type
selector
• Fast and
powerful charger with *0A and *0A
• Accept
generator’s energy output
• High power
factor
• Automatically
transfer between battery and line
modes
• Microprocessor
control guarantees high reliability
• Bypass without
battery connected
• Remote control
function
• Charge current
is adjustable *5%,*0%,*5%.**0%
(optional)
Protection
against:
• Over load, over
temperature, over charging, low
battery
• Reverse
connection(optional by hard
connector)
• blackouts
Specification
Nominal Power：***0W
Peak Power: ***0W
AC output: AC**0V/**0V or AC**0V/**0V/**0V
Phase & waveform: Single phase & sine wave
Acceptable Voltage: *****7VAC or ******3VAC(wide mode)
Line Low Transfer: *5V+/*4% or **4(**4 wide
mode+/*4%)
Line Low Return: *5V+/*4% or **4(**4 wide mode+/*4%)
Line high Transfer: **5V+/*4% or **3+/*4%
Line high Return: **7V+/*4% or **3+/*4%
Frequency: *0Hz or *0Hz (auto sensing)
Line Low Transfer: *7Hz for *0Hz,*7Hz for *0Hz
Line high Transfer: *5Hz for *0Hz,*5Hz for *0Hz
Phase & waveform：Single phase & sinewave(bypass mode sync
to input)
Voltage Regulation： +/**0%rms(bypass mode sync to input)
Frequency：*0Hz+/*0.3Hz(bypass mode sync to input)
Crest Power：3 times of ratings
Short Circuit Protection：Yes, shutdown after *0 minutes
Power Factor：0.**1.0
Battery Voltage： *2V/*4V/*8V
Minimum Start Voltage: *0V/*0V/*0V
Low Battery Alarm: *0.5V/*1V/*2V
Low Battery Transfer: *0V/*0V/*0V
High Voltage Alarm: *6V/*2V/*4V
Max Charging Current: *5A/*5A/*0A
Over Charge Voltage: *5.7V/*1.4V/*2.8V
Transfer Efficiency: line Mode＞*5% Battery
Mode ＞*8%
power saver: Available when the load is less than *5 Watts
Indicators:
*-LED Display
From the right to the left,LED1 line mode (green lighting)、LED2
inverter mode
(green lighting)、LED3 charging mode(yellow lighting)、LED4 Fully
charged
(green lighting)、LED5 over heat shutdown(red lighting)、LED6
Overloaded
shutdown(red lighting)、LED7 Saving Mode(green lighting)
*-LED Display
Charging Mode(green lighting)、inverter mode(green
lighting)、Alarm(red lighting)
Switch selector:
Saving Mode is on/off when push the switch
forwards/backwards, keeping it horisontal is turning
the inverter off.
Audible Alarm:
Sounding when the heatsink\'s tem is over **5℃ and shutdown after
*0 seconds.
Protections:
low battery、over charging、over temp、over load
Operating Environment: ***0℃,***0%RH(non-condensing)
Audible Noise: ＜*0dB
Size: **2mm***8mm***9mm
Net Weight (KG): *8Kg
