详情
Features
1. Output voltage, frequency parameter and
bypass function can be set via the LCD display.
2. LED Indicators display Detailed Real-Time
UPS status and parameters.
3. True online double conversion technology
with advanced microprocessor control
4. Advanced MCU microprocessor control
technology, ensure long life reliability.
5. Rack mount *9”design to save
space
6. Excellent Protection against over voltage,
over load, over current, over charge and so on.
7. Input L and N lines reverse wiring
detection, Auto start when AC back.
8. DC start function, Input PFC revise
function.
9. Smart RS**2 communication with monitoring
software.
*0. Intelligent slot available for AS***0 Dry
contact and SNMP card Remote control.
*1. Rack mount battery pack to extend backup
time.
Specification
Rack Mount UPS Model : RC*0K-L
Rated Power (VA/W): *0Kva/8Kw
Input Phase: Single Phase with Ground
Input Nominal Voltage : **0/**0/**0Vac
Input Voltage Range : **6 ~ **6VAC
Input Frequency Range : *6 ~ *4Hz
Input Power Factor : 0.*8
Connection : IEC*****0A inlet ; IEC*****0A inlet ;IEC*****6A inlet
; IEC*****0A inlet ; IEC*****0A inlet ; IEC*****6A inlet ; Terminal
Block ; Terminal Block
Output Phase : Single Phase
Output Voltage : **0/**5/**0Vac or **0/**0/**0VAC ± 2%
(1k~3k);**0/**5/**0Vac or **0/**0/**0VAC± 1% (6k~*0k)
Output Line mode Frequency : *6~*4Hz or *0Hz ± 0.2Hz (1k~3k);
*6~*4Hz (6k~*0k)
Battery mode Frequency : *0Hz ± 0.2Hz(1k~3k) ; *0Hz ± 0.*5Hz
(6k~*0k)
Output Waveform : Pure Sine Wave
Overload Capability : **8%~**0% for *0 sec., **0% for **0 ms
(1k~3k) ; **5%~**0% for *0 min.,**0% for 1 min. (6k~*0k)
Current Crest Ratio :3:*1
Connections : IEC**0 **0A * 4 ; IEC**0 **0A * 4 ; IEC*****0A and
Terminal Block ; IEC**0 **0A * 4 ; IEC**0 **0A * 4 ; IEC*****0A and
Terminal Block ; IEC*****0A * 4 and Terminal Block
Automatic Transfer :on overload and UPS failure
Before UPS Power-on :Default "NO", user adjustable to "YES"
(Yes)
Voltage Range : *0~**4VAC (Default), user adjustable within
*0~**6VAC (1k~3k) ;
**6 ~ **1VAC (6k~*0k)
Transfer Time : 0 ms; less than 4 ms from inverter to bypass and
vice versa
( Zero )
LED indicators : Load level / Battery level, Battery , Utility
Power, Inverter, Bypass, Overload, Fault
Audible Alarm : Bypass, On battery mode, Battery low, Overload,
Fault
Communications : RS***2 Serial Interface ;Intelligent Slot;
OPTIONS: WEBPOWER SNMP/WEB card, AS**0 card or WinPower
CMC)
Network Surge Protection : RJ*5 I/O port available for network or
Fax/Modem
Operating Temperature : 0 ~ *0°C
Operating Humidity : *0 ~ *0% non-condensing
Net Weight (Kg) : *0.3
Dimensions (L x W x H) mm : **0 x **2.6 x **0 (3U)
Battery Pack Type : Internal Batteries ; External Battery Pack;
External Battery Pack
; External Battery Pack; External Battery Pack; External Battery
Pack; External Battery Pack; External Battery Pack
Nominal DC Voltage : **2VDC
Battery Numbers & Capacity : 8Pcs **2V7.2Ah
Backup Time (Full load): 5 min ; 9 min (with 1 BP) ;5 min (with 1
BP)
Recharge Time : 5hrs to *0% ; 5hrs to *0% ; 5hrs to *0%
Charging Current (Max.) : 4.2A
Charging Voltage : **6Vdc±1%V
