详情
Specifications
Due to the highly sensitive nature of AdBlue/DEF,AILE developed
Adblue/DEF Automatic Nozzle in an effort to avert
contamination.
DEF Automatic Nozzle
Due to the highly sensitive nature of AdBlue/DEF,AILE have
developed specific dispensing nozzles in an effort to avert
contamination.
Adblue automatic nozzle features a device that stops the flow when
the tank is full.
Spill free delivery into the Vehicle requires the use of an Adblue
automatic Nozzle.
Due to popular demand, the *1A nozzle is now produced entirely from
stainless steel and features a three position trigger latch which
provides varied flow conditions for different sized Adblue/DEF
tanks.
Note: Prevents mis-fuelling of AdBlue/DEF into Diesel tank
Specification
Filling Nozzle Automatic trigger nozzle with safety cut out
valve
Mechanism : *-speed lever latch
Materials of construction: Stainless steel,Viton
Fittings: BSPP3/4" , NPT 3/4" inlet
Flow range: ****5 liter/min
Max pressure: 5 Bar
Diameter : *9mm
Colour : Blue
Before beginning installation of the product, please carefully read
all warnings.
• Follow all manufacturer’s instructions.
• Use safety cones to mark-off work area.
• Shut off power to the dispenser and close the emergency shut-off
valves under the dispenser.
Relieve system pressure before servicing or replacing dispensing
products, such as nozzles, swivels, or breakaways.
• If nozzle replacement, remove old nozzle with a wrench. Carefully
drain fuel from hose & nozzle into approved container.
REMOVAL OF THE HOLD-OPEN LATCH ON
THE NOZZLE
• If local codes require that the nozzle cannot have a hold-open
latch, please follow these instructions to remove the hold-open
latch.
• Verify dispenser is turned off.
• Place the nozzle on a flat surface. Hold lever in open position
and insert a flat-bladed screw driver along side of the hold-open
rack. Pry the rack upward and off the rivets.
CAUTION: Protect your face and other exposed body parts;wear safety
glasses.
• Make sure broken rivets are removed from the guard. Throw away
old parts.
• Do not alter the trigger or rack mechanism from its original
configuration. The nozzle shut-off mechanism could be impaired as a
result.
Only use authorized AILE repair kits.
