C17200 Beryllium copper

详情

C****0 Beryllium Copper

Cube**-C****0 (CDA **2) Beryllium Copper is the most commonly utilized Copper Beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C****0 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed **0 ksi, while the hardness approaches Rockwell C*5. Meanwhile, the electrical conductivity is a minimum of *2% IACS in the fully aged condition.C****0 also exhibits exceptional resistance to stress relaxation at elevated temperatures.

Typical Application for C****0 Beryllium Copper Alloys:
Electrical Industry: Electrical Switch and Relay Blades, Fuse Clips, Switch Parts, Relay parts, Connectors, Spring Connectors, Contact Bridges, Belleville Washers, Navigational Instruments, Clips
Fasteners: Washers, Fasteners, Lock Washers, Retaining Rings, Roll Pins, Screws, Bolts
Industrial: Pumps, Springs, Electrochemical, Shafts, Non Sparking Safety Tools, Flexible Metal Hose, Housings for Instruments, Bearings, Bushings, Valve Seats, Valve Stems, Diaphragms, Springs, Welding Equipment, Rolling Mill Parts, Spline Shafts, Pump Parts, Valves, Bourdon Tubes, Wear Plates on Heavy Equipment, Bellows

Available Sizes:
Custom Diameter & Sizes, Random Mill lengths

Available Products (forms):
Round bars, Round strips, Round wires, Round tube,
Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils
Custom shapes are available upon request.

Chemical Composition:

Be: 1.***2.*0%
Co+Ni: 0.*0% Min.
Co+Ni+Fe: 0.*0% Max.
Cu: Balance
Note: Copper plus additions equal *9.5% minimum.

Typical Physical Properties:

Density (g/cm3): 8.*6
Density before age hardening (g/cm3): 8.*5
Elastic Modulus (kg/mm2 (**3)): *3.*0
Thermal Expansion Coefficient (*0 °C to **0 °C m/m/°C): *7 x ***6
Thermal Conductivity (cal/(cm-s-°C)): 0.*5
Melting Range (°C): ******0

Note: 
1). the units are based upon Metric.
2). the typical physical properties apply to age hardened products.

International Specification:

Rods/Bars/Tubes: ASTM B**6,**1,**3; SAE J**1,**3; AMS ***3,***4,***5; AMS***0,***1;
RWMA Class 4
Strips: ASTM B**4, AMS***0,***2; SAE J**1,**3 
Sheets: ASTM B**4
Wires: ASTM B**7, AMS***5, SAE J**1,**3
Plates: ASTM B**4, SAE J**1,**3; AMS***0,***3,***4,AMS***0,***1; RWMA Class 4.

European Standards: CuBe2, DIN 2.***7, CW**1C to EN

Note: 
ASTM: American Society for Testing and Materials 
SAE: Society of Automotive Engineers 
AMS: Aerospace Materials Specification (Published by SAE) 
RWMA: Resistance Welder Manufacturers\' Association 
Note: Unless otherwise specified, material will be produced to ASTM.

Mechanical Properties:

The Mechanical Properties will be available on request from customers.

Most Commonly Temper Used:

Rods/Bars/Tubes: A(TB*0),H(TD*4),AT(TF*0),HT(TH*4)
Strips: A(TB*0),1/4 H(TD*1),1/2 H(TD*2),H(TD*4)
Sheets: A(TB*0),1/4 H(TD*1),1/2 H(TD*2),H(TD*4),AT(TF*0)
Wires: A(TB*0),1/4 H(TD*1),1/2 H(TD*2),3/4H(TD*3),H(TD*4)
Plates: A(TB*0),H(TD*4),AT(TF*0),HT(TH*4)
 

We, ALB Copper Alloys Co., Ltd., are committed to provide consistently high quality products and services to satisfy our global customers’ various and on-going demands based on our groups principle – Mutual Benefit, Fair Business and Obey Contract Strictly.

We can not be s_ccess without u, which enables us to warmly welcome business friends & partner at home and abroad to establish business relationships on the basis of Equality and Mutual benefit.

ALB Group continues to be the Preferred & Professional supplier for you all!