详情
SECTION OF GRINDING AND GRANULATION OF DRY RAW MATERIALS
BASED ON “KAHL” PROCESS
EQUIPMENT
Components:
The section of grinding and granulation of dry raw
materials is completed:
1. Hammer mill **0/***0 –
1 unit.
2. Automatic water metering system WD-GLI *5 –
1unit.
3. Mixing screw М **0 –
1unit.
4. Ripening hopper RWB *****1 – 1
unit.
5. Dosing and mixing screw DM **0 – 1
unit.
6. Auxiliary water metering system– 1
unit.
7. Pelleting press with flat die ******0 –
1 unit.
8. Electric hoist for dismantlement of die and
chaser mills – 1 unit.
9. Counterflow granule cooler GK*9x*9 –
1 unit.
*0. Vibrosieve for granules sifting – 1
unit.
Destination:
Mentioned section is designed for the grinding of dry wood
raw materials with humidity****2% with following moistening,
granulation and cooling of end product. Production capacity of this
section makes up
5 tones end products
per
hour.
Destination and brief specifications of the section of
grinding and granulation of dry raw materials:
Hammer mill **0/***0 – is designed for grinding of
dry raw materials to the fraction less 4 mm, catching of
metal inclusions.It’s completed by double screw feeder, mill power
is
6 tones per hour. Installed capacity of driving
gear is
**0 kW. The number of
hammers is **0 pieces. The number of sieves is 2 pieces.
Automatic water
metering system WD-GLI *5 – is
designed for automatic metering installed amount of water by DCS
operator (Digital Control System) into mixing screw before ripening
hopper. The power is
*****5 liters per
hour under pressure that makes up
***0
bars.
Mixing screw М **0 – is designed for prior
moistening of the grinded dry raw materials before ripening hopper.
The screw power is
6 tones per
hours. Installed capacity of driving gear is
*1 kW.
Ripening hopper RWB *****1 – is designed for even
mixing of moistened raw materials and giving them homogeneity by
humidity. The volume of ripening hopper is
5, 5
m3. Installed capacity of driving gear
is
9, 2 kW.
Auxiliary water
metering system (as required)
is designed for moistening of the dry raw materials before
loading into pelleting press in case of disrepair of basic
moistening system..
Dosing and mixing screw DM **0 – is designed for
final moistening and feeding of grinded dry raw materials to
pelleting press. The screw power is
6
tones per hour. Installed capacity of driving gear
is
5, 5 kW.
Pelleting press
with flat die
******0 – is designed for forced compaction of grinded dry
raw materials in canals of the die and forming of fuel granules
according to the established quality. The power of pelleting press
is
5 tones per hour. Installed
capacity of driving gear is
**0
kW.
The number of chaser mills is 5 pieces. The oiling of pelleting
press is carried out automatically.
Electric hoist is designed for
acceleration of dismantlement, adjusting and tuning
operations of the die and chaser mills of pelleting
press.
Counterflow granule
cooler GK*9x*9 – is designed for cooling, giving
strength to granules, dust removal, further metered flow of
granules to the vibrosieve.
Vibrosieve for granules sifting – is designed for
separation of fine particles and dust from fuel granules with
further feeding of granules on transfer mechanisms.
Price: The value of granulating section– **1
thousands euro.
Delivery basis: EXW *5 Kauno str.,
Vievis, Lithuania
Location place of
warehouse:
*5 Kauno str., Vievis,
