II**-technical
features of Pensky-Martens Closed Cup Flash
Point Tester
1.This instrument is designed correspond with the
requirements of GB/T*******8.
2.The heating power is continuously and stepless adjustable.
The power is shown visually by voltmeter.The temperature
control mode is advanced and reasonable.
3.The structure is designed small and exquisite.The
stainless-steel table board is beautiful and easy to
clean.
4.Operation is easy.Test results are precise.It has been
chosen as the instrument to test the closed cup flash point by many
metering and detecting units.
III**-Specifications and parameters
OF Pensky-Martens Closed Cup Flash Point
Tester
1.Power supply:AC (**0±*0%)V, *0Hz.
2.Heating device::The heating power is continuously
adjustable from 0 W to **0W.
3.Rate of sample’s heating
up::(1~*2)°C/min;Controllable and adjustable.
4.Electric stirring rate:(1)(*0~**0)turns/min,suitable
to test procedure A.
(2)(**0±*0)turns/min,suitable to test procedure
B.
5.Standard oil cup:(1)Inner diameter:
*0.7mm~*0.8mm.
(2)Depth:
*5.7mm~*6.0mm.
(3)The
scribed line depth of capacity of testing oil:
*3.9mm~*4.3mm.
(4)Capacity
of testing oil:about *0ml
6.Igniting device:(1)Igniting source: gas(or other
civilian fuels,the same below)
(2)Bore diameter: 0.8mm
7.Thermometer:Mercurial thermometer, correspond with
GB/T*******8
(1)Scale *5°C~**0°C, division
0.5°C.
(2)Scale *0°C~**0°C, division
1°C.
(3)Scale *0°C~**0°C,division
2°C.
8.Ambient temperature:≤ *5°C
9.Relative humidity:≤ *5%
*0.Power consumption of overall unit:≤
**0W
