详情
Product description:
LXC**6 a module generator set from the start,
by the touch panel keys to select three kinds of working conditions
can be achieved manually start / stop the generator, you can also
signal automatic start / stop the generator via remote boot, and be
able to detect a fault (oil pressure, water temperature / high
cylinder temperature, emergency stop alarm, automatically
disconnect the fuel relay speed) simultaneously stop solenoid is
energized. Graphic LCD panel indicates a fault condition, providing
real and effective fault alarm signal.
Product performance and features:
Features:
1, green backlight, day and night, the
generator parameters are clearly visible.
2, LCD icon display alarm, the alarm
message is simple and clear, world-wide.
3, a variety of generator parameters
displayed on the LCD digits.
4, PC panels affixed durable,
waterproof.
5, panel key operation, easy start and
stop the generator, thus reducing wiring.
6, all parameters can be set on the
front panel for easy commissioning and maintenance.
7, can be connected to a computer set
up and monitored via USB.
8, ultra-small size, suitable (to list
the specific size) small generators, especially for small gasoline
intelligent control unit.
9, with a shock apron, waterproof and
shockproof to achieve the panel.
*0, install the assembly: Flame retardant ABS
housing, pluggable terminal blocks, embedded installation, compact,
easy to install.
Performance:
1, power range: Wide input voltage (8 ~ *5)
VDC, able to adapt to different starting battery voltage
environments;
2, a microprocessor core, the LCD
screen icon symbol display, touch button operation;
3, with the power, speed, temperature,
pressure, liquid level sensor input ports for digital display of
electricity.
Can detect and display of power are: Frequency Hz power generation
voltage V engine temperature º C oil pressure kPa speed rpm total
running time H, the battery voltage V, fuel level%.
4, power voltage, battery voltage, speed,
temperature, pressure, liquid level sensor threshold can be set,
enabling the following alarm or warning capacity: oil pressure,
water temperature / high cylinder temperature speeding, failure due
to speed emergency stop start stop failure, power generation
voltage is too high, too low, too high frequency power, low battery
voltage is too high, too low fuel level low
5, with idle control and ETS
function;
6, with three kinds of operation: manual,
automatic, shut down;
7, the controller can be set by software set
to the engine controller (do not select power voltage input),
adapted to control the water pump, etc.;
8, a red light-emitting diode panel (LED)
display and alarm status of work;
9, a variety of temperature, pressure and oil
level sensor can be used directly, and custom parameters;
temperature, pressure and temperature sensors, pressure alarm
parallel role in providing the digital level of protection while
increasing respectively;
*0, a variety of start conditions (speed
sensors, hydraulic, power generation) optional;
*1,4 relay fixed output port (fuel output,
start output, shut down output, idle output);
*2,1 programmable output, alarm output can be
set to public, fail to stop output, preheat output or idle speed
control output function;
*3, allows the user to change the settings of
its parameters, and memory in the internal FLASH memory, when the
system is powered down it will not be lost, the controller of all
parameters can be adjusted from the controller front panel, or via
USB from the PC USB supplies power to the controller, set
parameters through monitoring software;
Specifications:
Operating voltage: DC8.0V continuous power
supply to *5.0V
Total power consumption Standby: *2V: 0.3W,
*4V: 0.4W
Work: *2V: 1W, *4V: 1.1W
Alternator Voltage input: Single phase
two-wire *5V AC - **0 V AC (ph-N)
Alternator Frequency: *0/*0Hz
Speed sensor voltage: 1V to *4V
(rms)
Speed sensor frequency: max *0kHz
The maximum total running time: *9,**9.9 hours
(after the decimal point is 1/*0 hours, 6 minutes that change
once)
Start relay output: 1Amp DC*8V DC power output
B +
Fuel Relay Output: 1Amp DC*8V DC power output
B +
Shutdown Relay Output: 1Amp DC*8V DC power
output B +
Idle Relay Output: 1Amp DC*8V DC power output
B +
Programmable relay outputs: 1Amp DC*8V DC
power output B +
Switch input port: connected B-
Dimensions: *7mm x *8mm x *4mm
Hole size: *8mm x *6mm
Working conditions: Temperature: (**5 ~ **0) º
C Relative Humidity: (*0 ~ *0)% non-condensing
Storage conditions: Temperature: (**0 ~ **0) º
C
Protection class: IP*5: when waterproof rubber
ring between the controller and the control panel.
IP*2: When there is no waterproof rubber ring
between the controller and the control panel.
Dielectric strength: Object: between input /
output / power referenced standards: IEC*******2 test method:
AC1.5kV/1min leakage current 1mA
Weight: 0.*5kg
