详情
Product description:
LXC***0 series power plant automation
controller with integrated digital, intelligent and network
techniques for single diesel generator automation and monitoring
system, automatic start / stop, data measure and alarming and
"three remote" (need with RS**5 module) function. Controller with
large-screen LCD display, Chinese, English, Spanish and Russian
optional interface operation, simple operation, reliable operation.
Achieve a precision measuring a variety of parameters, setpoint
adjustment, and timing, threshold setting and other functions, the
controller of all parameters can be adjusted from the front panel
of the controller, or use a PC via USB, RS**2 interface
programming, adjustment and monitoring. Its compact, simple wiring,
high reliability, and can be widely used in various types of
generators automation systems.
LXC***0: LXC***0 based on the increase
in electricity consumption monitoring and mains / generator
automatic switching control function (AMF), especially for
stand-alone automated systems.
Product performance and features:
1 LCD LCD is **2 × *4, in four languages (Chinese, English,
Spanish, Russian) display, touch button operation;
2 is suitable for three-phase four-wire, single-phase two-wire,
three-phase three-wire, two-phase three-wire (**0V/**0V) power
*0Hz/*0Hz system;
(3) collect and display mains / generator phase voltage, phase
current, frequency, power parameters;
4 mains overvoltage, undervoltage, phase function, power generation
has overvoltage, undervoltage, over and under frequency,
overcurrent function;
5 various parameters sophisticated collection engine: coolant
temperature, oil pressure, fuel quantity, the charger voltage, and
depending on the setting for effective protection of the engine, to
avoid accidental damage to the engine;
6 control and protection functions: automatic diesel generator
start / stop, sub-gate (ATS switch) and perfect fault protection
functions;
7 With ETS, idle speed control, preheat control, lifting speed
control function, and are relay outputs;
8 parameter setting: Allow user to change settings on its
parameters will not be lost when the system is powered down, the
controller of all parameters can be adjusted from the controller
front panel, or by using a PC via a USB programming interface
adjustments;
9 a variety of temperature, pressure sensors can be used directly,
and custom parameters;
*0 variety of start conditions (speed sensors, hydraulic, power
generation) optional;
*1 W (8 to *5) Power supply range VDC, able to adapt to different
starting battery voltage environments;
*2. Modular design, flame retardant ABS housing, pluggable terminal
blocks, embedded installation, compact, easy to install
Specifications:
Operating voltage: DC8.0V continuous
power supply to *5.0V
Total power consumption: <3W (Standby
mode: ≤ 2W)
Alternator Voltage Input: *5V AC **0 V
AC (phN)
Phase four-wire *5V AC **0 V AC
(phN)
Two-phase three-wire *5V AC **0 V AC
(phN)
Single-phase two-wire *0V AC **0 V AC
(phph)
Three-phase three-wire
Alternator Frequency: *0 Hz /
*0Hz
Speed sensor voltage: 1.0 to *4V
(rms)
Speed sensor frequency: max
****0Hz
Start relay output: 5A DC*8V DC power
output
Programmable relay output 1: 5A DC*8V DC
power output
Programmable relay output 2: 5A DC*8V DC
power output
Programmable relay output 3: 5A DC*8V DC power
output
Programmable relay output 4: 5A AC**0V passive
output
Programmable relay output 5: 5A AC**0V passive
output
Dimensions: **3mm x **5mm x*1mm
Hole size: **0mm x *0mm
Current transformer secondary current: Rated:
5A
Working conditions: Temperature: (*5 ~ *0) ° C
Humidity: (*0 ~ *3)% RH
Storage conditions: Temperature: (*0 ~ **0) °
C
Protection class: IP*5: when waterproof
rubber ring between the controller and the control panel.
IP*2: When there is no waterproof rubber ring
between the controller and the control panel.
Dielectric strength: Object: Input / Output /
Power
Reference Standard: IEC*******2
Test method: AC1.5Kv/1min leakage current
3mA
Weight: TBD
