详情
Product description:
MX**1 is a single-phase generator voltage
regulator plate detection PMG Generator Automatic Voltage Regulator
(automatic voltage regulator). As the use of exciter from PMG
excitation power, voltage stability. Load good, with and machine
function. There PMG used in AC permanent magnet machines UC, HC, LV
series generators.
1, can be replaced MX**1, but the line must be
changed, the function is not so perfect, but basic functions are
similar.
2, the product can replace MX**1, MX**1 is its
distinction as the permanent magnet exciter excitation power, MX**1
is from PMG excitation as the excitation power.
Product performance and features:
1, the regulator accuracy <±
1%. <br /> 2, can be used in
parallel units can automatically limit the short circuit current
output.
3 to choose copper jumper *0/*0
Hz.
4, when a short circuit can automatically
limit the current output.
5, with DIP, DROOP adjustment and
over-excitation trip, with a low frequency protection (UFRO) and
voltage slowly build function.
6, with the low-frequency protection (UFRO)
and voltage slowly build function.
7, with LED indicates low frequency and
over-excitation state, able to copper jumper settings to suit
different power generators, MX**1 can be used in parallel units,
able to copper jumper settings to suit different power generation
machine.
8, the selling point: DROOP and machines,
auxiliary input, over-excitation voltage protection.
AVR adjustment (adjusted at the factory, the user only when
necessary, adjusted as follows):
1, the output voltage of the voltage regulator
such as inconsistent voltage adjustment potentiometer clockwise,
the output voltage increases; and vice versa.
2, the frequency setting of the engine speed
adjusted *7HZ, UFRO potentiometer counterclockwise rotation, so
that the indicator light-emitting diodes, can be transferred back
to the engine speed.
3, overcurrent less excited at the rated power
of the generator, the rotating exciter trip potentiometer
counterclockwise, so that the indicator light-emitting diodes, and
then rotated about 5 degrees to shun.
4, overvoltage counterclockwise rotation
overvoltage adjustment potentiometer, so that the indicator
light-emitting diodes, and then rotated clockwise about 5
degrees.
The definition of the different colors:
1, which is the meaning of three colors: red
for Stanford\'s early products, the use of capacitor WIMA, the
quality is very good. Blue indicates the latter product, capacitor
EPCOS, the quality is also good. Gray is the last two years before
that, the capacitance of AV, and the packaging is
different.
2, due to different capacitance, the price is
different.
3, although prices vary, but the quality is
the same. But some maintenance staff always feel better in red, red
is also the most expensive.
Specifications:
Power input :******0V AC, *-phase 3A
(PMG)
Sensors detect :******0 V AC single
phase
Output: voltage **0VDC (maximum)
Current: 3.7A (continuous) 6A/*0S (instantaneous)
Protection: Built-in low-speed, over-excited,
LAM,
Adjusted rate: better than 1% (for brushless
generator)
Patented design: ultra-low voltage
magnetic effect, fast response, voltage is more stable. The key
loop using military-grade high stability components, temperature
drift of less than 0.*5% / ℃. Multiple independent protection
circuit design, more safe and reliable.
We promise: quality issues in a lose
three!
