The Product Characteristics
1. Viscosity is low, the infiltration is strong and can be injected
into the micro- wide crack of 0.2mm;
2. Good performance of anti-aging, anti-media (acid, alkali,
water);
3. Does not contain volatile solvents, hardening without
contraction;
4. Have excellent toughness and impact resistance, after cured;
5. It is easy for A and B to mix well with a ratio of
component.
6. Does not contain volatile solvents, safe, non-toxic, easy to
construct.
7.Technnical Specification: Conform to the Standard Technical Data
GB*********6.
Scope of Application
1. Repair cracks in concrete engineering;
2. Injecting in and strengthening reinforcement for repairing
internal defects of the concrete (cellular, loose);
3. Filling tile hollowing.
Construction Method
Clean the surface of the concrete and the steel, applying the
sealing adhesive.
Mix A and B in the clean container and fill hole to completing the
filling process.
Scrap the crack, fill hole repeatedly to seal the crack.
Proportion:
A: B = 3: 1 (weight ratio)
Storage
Store in cool ventilated environment to avoid the sunlight, the
storage period is 9 months.
| Ambient Temperatures |
Initial setting Time（h) |
Start Curing Time（h) |
Finish Curing Time (h) |
| *5℃*0℃ |
*2 |
*8 |
**0 |
| 0℃**0℃ |
5 |
*2 |
**6 |
| *0℃**0℃ |
3 |
*0 |
**2 |
| ≧*0℃ |
1 |
8 |
**8 |
