详情
Sintd "optical" compact dryers combine the function of
dehumidifying, drying and two-stage conveying into one single unit,
specified for the production of "optical class" products, such as
lenses, LCD backlight panel, compact discs etc. They feature
honeycomb rotor for dehumidifying, ensuring continuous and constant
low dew-point. Under ideal conditions, it can provide lower than
minus *0 degree dew-point dehumidified air.
Features
* Combine the function of dehumidifying, drying and two-stage
conveying into single unit.
* TCD Dryers Loaders are equipped with honeycomb rotor to obtain
stable low dew-point drying air. It have two models: Semi-open and
hermetic.
* Feeding system is equipped with shut-off valve to ensure no
surplus raw material in hopper tubes.
* Microprocessor is one of the standard equipment.
* Optical-class TCD-OP material contact surface are all mirror
polished and collocates conveying system with closed loop to avoid
contamination and moisture regain.
* Optical-class TCD-OP system has standard configuration of HEPA,
which could filter tiny ion of 0.3um with filter ratio of *9.*7
%.
* Heat preserved drying hopper barrel adopts down blowpipe design
and collocates with cyclone air exhaust to avoid heat lost and
improve drying efficiency.
* This dehumidifying series adopt double cooler structure to ensure
lower return air temperature and dew-point value.
* PLC control and touch HMI are optional, making operation
convenient for machines automatic running.
* Dew-point monitor is optional to monitor dew-point value at all
times.
* Dew-point value is settable, dew-point value is set between **0
to **0 degree according to actual need of plastics material. 0~*0%
of total power consumption could be saved.
* The function of controlling drying capacity is optional. Once
setting the name of dried plastics material and used volume of per
hour, system would adjust air volume and consumption automatically.
Volume used per hour can be set *0~**0% as drying capacity to save
the totally power consumption of 0~*0%, achieving maximum of
resources collocation and avoiding over-drying which affects
physical and mechanical capacity of plastics material.
