Long range controller doesn’t need exterior power
while automatically sensing to adjust and maintain the temperature,
normally used for underfloor heating systems. It is easy to fix and
dismantle.
一．Long range controller is
used screw to joint on the control valve body, by adjust the
controller to set the temperature range. This can keep the
temperature to a certain point, in case to set at a wrong point
,keeping flow rate to a steady range.
二．Temperature setting
For example, you can use it to control the return water of the
floor heating system, temperature of the hot water tank and so on
to reach your desigred tempearture. Two temperature range can be
choosed:For room: 6℃**8℃
; For underfloor heating system: *0℃**0℃
三、Main
specification
Max pressure：1.0Mpa
Max differential pressure：0.1Mpa
Size：1/2＂、3/4＂、1＂
Connection size：M*0X1.5
Tube length：2m
Control range:6℃**8℃,*0℃**0℃
Working medium：Water
Max pressure：*0bar
Stroke：3mm
四． Installation note:
When fixing the controller to the valve body, use proper tools to
screw it tight, do not use strong strength in case of broking the
nut.
The controller should be fixed with manifold and keep them
ventilating, avoid strong lights or near the hot stuff.And
not to be barried’
3. Use soft clearance liquid to clean its furface., do not use
alcohol or bleach liquid or any other organic
solvents.
