Our company has been engaged in the production of diecutting machines for many years, and we are highly experienced in design, manufacture, and aftersales service etc. We have our own knowledge in this product which can be manufactured in batches, and our devices are widely distributed all over the world depending on the high standard configuration, high standard design, high quality, high speed, high safety and high cost performance. 1、 Cutting Parts All cuttings parts are designed stably without any scamp work or stint material. The whole machine is *6T, and all casts are made of high strength nodular cast iron HT**0 (HT**0 commonly). The wall plate is *0mm thick (*5mm commonly) and is shaped by cast steel with high tensile strength against deformation. The crankshaft is made of fully quenched chrome steel, the large worm wheel and all bearing bushes are made of alloy copper, and the worm wheel is *0mm thick (*5mm commonly). The worm is made of quenched bearing steel by grinding (*5# carbon steel not by grinding commonly). All other parts are made of standard *5# steel at least, and all above parts are directly manufactured by our company, or all legal liabilities will be taken by us. 2、 Standard Parts Imported parts and standard parts have special trademarks and they cannot be counterfeited; the high price of a diecutting machine arises from the highly standard configuration as all bearings are from Japan SK and key parts from better Sweden SKF. It is integrated with Taiwan highly precise intermittent reduction gear, Siemens main motor, and Germany main chain, other chains are from Taiwan TY, even every a little screw is in the topmost grade *2.9, and undoubtedly they are very important for the product quality. 3、 Electrical Parts Electrical parts are famous brand products like standard parts. The frequency governor, programmable controller (PLC computer), optical switches and other key controlling elements are from Japan Omron. Other switches, contactors and relays are from France Schneider. The perfection of high quality diecutting machine is originated from the world famous electrical configuration. 4、Standards for Assembling This diecutting machine is assembled to satisfy a high requirement, so our company has established many high standard part tolerances and assembling levels; e.g. the bearing tolerance is within 0.*2mm; the hardness of each quenched part is *5° above; all bearing are assembled in the best process hot assembling to prevent forced knocking, and each part is assembled with a clear tolerance record. When the assembled machine is operated with no load for *8 hours, the bearing temperature cannot be *0°C higher than the room temperature. No disorderly shutdown is allowable within **0 pieces of paper, and there mustnt be any nonacceptable noise from the finally assembled machine. In all, each machine is followed by a list of acceptance check, and it will not be accepted if any item is beyond the standard. 5、Human culture principle The deep company culture make every employee know that quality is the core meaning of life, united to keep improving is the basic requirement for being a person and producing a machine, and saving money for the client, helping the client to earn money, and assisting the client in development are our service principle. We hope each client can deeply and favorably know our products. We believe that our high quality products will be one of your wealth sources.
Descriptions of the entire product
Automatic diecutting & stripping machine MYP***0E is the key device for the production of cartons, paper boxes and high standard paper products, etc. It is especially applicable to the automatic diecutting and stripping of complicated paper boxes and cigarette cases to rationalize the production of paper boxes. This machine is integrally assembled, transported and mounted, it can be put into operated in one day, and thus the cost is reduced. The precise assembly and high configuration make it better than Taiwan machines and competitive with Japan machines. Advantages of our diecutting machine: 1、Paper Feeding Unit and Paper Conveying Unit Paper Feeding Unit：
The enlarged paper feeding head (Feida head) has 9 suction nozzles applicable for paper in different thicknesses and 5 paper feeding nozzles which can be independently adjusted for parallel paper feeding. It also has 4 paper lifting nozzles which can move up and down in a large stroke especially applicable for small corrugated paper. The large power wind pump provides a high suction force. It can be conveniently adjusted; paper can be divided reliable, and it runs fast and stably.
By the special secondary paper feeding and preliminary paper stacking, the primary and secondary can be shifted to ensure uninterrupted paper feeding.
To improve the working efficiency, paper feeding and collecting are realized by Taiwan Chenggang dualspeed reduction motor which provides a long service life and a high torsional force, and it saves time due to its high lowering speed.
Paper Conveying Unit：
The paper conveying part is made of stainless steel plate to prevent rust and provide stable and correct paper conveying.
Paper is positioned by a pushing unit and a pulling unit which can be shifted conveniently for different specifications of paper.
2、Diecutting Unit
The cast wall plate is rejected because of its low pulling force but high deformation, and steel wall plate is applied like Japan machines. The pulling force is enlarged, i.e. the pressing force is enlarged, and it becomes firm and endurable without any deformation.
This machine is upgraded to a brand high level by the automatic pressure regulation and automatic front scale regulation. The addition of this function upgrades it into a convenient and favorable digital device with high controlling speed.
The oil route is forcibly lubricated by a HP oil pump as made in Taiwan to reduce wearing, an oil cooler is added to cool the lubricating oil, and the main chain is lubricated timely to improve the operation efficiency.
The novel transmission mechanism provides high speed diecutting, and the highly precise swing link platform improves the padding speed (almost without padding), as it is known the pressure can be hardly balanced in most of other common machines.
The pneumatic plate locking unit can fix the upper frame more firmly and faster. In our diecutting machine, the front, back, left and right are pneumatically locked simultaneously to realize a high correctness and a high speed. However, common machines are tightened by screws.
The paper holding rack chain is imported from Germany, which provides a long service life and a stable diecutting precision.
The Japan intermittent mechanism is the main transmission part of the diecutting machine, and it improves the diecutting speed and precision and reduces the device noise, while the speed and precision cannot be realized by any domestic mechanism.
The torque limiter is equipped with overload protection. The primary and secondary units can be separated at any overload to ensure the machine can be operated safely. The Italia pneumatic brake and clutch with Japan SMC rotary joint comply with the European standard. They provide fast clutching, high and stable force, long service life and low noise.
3、Paper Collecting Unit
Paper can be collected automatically and orderly.
The efficiency is improved by an uninterrupted paper collecting grid plate, and when paper is stacked to the specified height, the paper collecting grid plate will be replaced by another plate for uninterrupted paper collecting.
By the pneumatic sampling, the diecut paper can be conveniently inspected at any time.
4、Electrical Control Unit
The electrical control system is Japan
PLC computer automatic control for fully detecting and controlling, and the Japan Omron frequency converter with Taiwan main motor provides high power for paper feeding, paper conveying, diecutting, and paper collecting.
The humanmachine interface can display various working conditions, indicate fault positions and give solutions.
The machine is equipped with various safety protection units. A visible and audible alarm will be given at any fault, and the machine will be automatically shut down to protect personal and device safety.
