Color coating plate is
classified as below:
1. Common Building Color
Coating Plate
Common building color coating plate
adopts polyester coating material as finishing painting to be
coated by roll coater with technology of one coating and one baking
or two coating and two baking processes. It has excellent
anti-corrosion, mechanical property, decorative appearance. The
color plate is formed into various new building material by other
technical process of pressing into shape, composition etc. which is
applied in various new industry building.
2. Home appliance tectorial
membrane plate
With rapidly development of home
appliance industry, the color coating steel plate is widely
applied. At same time, it has more requirement on color coating
plate. Due to home appliance is most
used in indoor, therefore, galvanized
plate or thin layer of galvanized plate is used as its base plate,
and then it is composited into home appliance after three coating
and three baking or by again
coated with a layer decorative
film.
3. Fluorocarbon plate adopts
PVDF as main coating layer of fluorocarbon, max. electric load
performance of atomic fluorine form into more stableness high
performance fluorocarbon key and add its
unique equal symmetry
molecule structure which make fluorocarbon plate with excellent
property of anti-corrosion. Fluorocarbon plate become first choice
of modern high degree building by the
way of beautiful color,
endurance, strength weather resistance property and physical and
chemical stableness.
4. Color Printing Decorative
Plate
Printing type coating
technology is that the intaglio embossed roll on finishing
coater conducts its figure onto the coating roll to implement
printing such as wood grain figure. On other hand, the roll coater
again coats light printing on its finishing printing or anti-violet
ray protection film. The purpose of technology of printing process
is mainly to enhance decorativeness and create real feeling. The
printing plate is mainly used for decorative plate.
Product Example
|
Production
mix
|
****0tpa
|
****0tpa
|
|
Incoming
coil
|
Galvanized coil or
common coil
|
Galvanized coil or
common coil
|
|
Thickness of incoming
coil
|
0.*5?1.2mm
|
0.*5?1.2mm
|
|
Width of incoming
coil
|
**0?***0mm
|
**0?***0mm
|
|
Coil weight of incoming
coil
|
*0t
|
*0t
|
|
Coil weight of
finishing product
|
5t
|
5t
|
|
O.D of
Coil
|
φ**0?***0mm
|
φ**0?***0mm
|
|
I.D of
Coil
|
φ**8/**0mm
|
φ**8/**0mm
|
|
Max. Technical
Speed
|
*0m/min
|
*0m/min
|
|
Inner speed of
loop
|
*5?*0
m/min
|
*5?*0
m/min
|
|
Coating layer thickness
of color plate.
|
Thickness of single
layer dry film at positive face is within ***5μm; thickness of
single layer finishing printing dry film at positive and negative
face regulated within **8μm
|
Thickness of single
layer dry film at positive face is within ***5μm; thickness of
single layer finishing printing dry film at positive and negative
face regulated within **8μm
|
|
Quality of color
plate
|
Conformity with
requirement of national standard
GB****4/*1
|
Conformity with
requirement of national standard
GB****4/*1
|
|
Splitlevel of
coiling
|
Single
side≤1.0mm
|
Single
side≤1.0mm
|
|
Energy
|
LPG?steam and
electricity
|
LPG?steam and
electricity
|
