详情
Main Application & Applicability:
Used for one or two in service one standby water treatment
systems
Be suitable for all of chinacoal meter type control valve.
Product Characteristics:
1.Wide voltage design,Transformer connect with power
AC100-240V,50/60Hz.
2.Multi-programs optional,Valve has two programs of one in service
one standby and two in service one standby. Two programs could be
interchange via a switch.
3.Signal output,Valve has signal output connector. When one valve
is in regeneration, signal is sent out.
Basic Setting & Usage :
2.1. One in service one standby usage
This controller can be connected with two meter type control valves
with two solenoid valves which are installed on water outlet to
realize one in service one standby system.
Before using, dial the switch on board to be: 1. Connect wires as
figure 1. All of connectors on board are passive switches. When it
is closed, the indicator light on.
2.2. Two in service one standby usage
This controller can be connected with three meter type control
valves with three solenoid valves which are installed on water
outlet to realize two in service one standby system. Before using,
dial the switch on board to be: ON. Connect wires as figure 2. All
of connectors on board are passive switches. When it is closed, the
indicator light on.
