Factory supply 5 v60a switch power supply

详情

1, the input voltage current: *0 ~ **2 vac / **0 ~ **2 vac by switch choice
2, input frequency: ****3 hz
3, the output voltage current: 5 V (4.**4.5 V adjustable), 0 ~ *0 a
4, overload protection value: **5% ~ **0%, and power recovery
5, working environment: - ****0 ~ *5% r.h. *0 degrees.
6, appearance size: **5 x **5 x *0 mm
Second, the technical parameters:
Performance model no.
DS - **0 w - 5
5 v dc output voltage
Output voltage tolerance + / - 2%
Rated output current *0 a
The range of output current 0 ~ *0 a
MVP - **0 p ripple and noise
Into the line stability plus or minus 0.5%
Load stability plus or minus 0.5%
Dc output power **0 w
The efficiency of *3%
4.**5.6 V dc voltage adjustable range
The input voltage range of *0 ~ **2 vac / **0 ~ **4 vac with ****3 hz switch option
The input current of 6.5 A / **0 v / **5 v 4 A
Impact current cold start current *5 a *0 a / **5 a / **0 a
Leakage current < 3.5 mA / **0 vac
Overload protection type: **5% ~ **5% cut output reset: automatic recovery
Overvoltage protection 5.*5 *3.8 9.4 *0.9 V - 6.*5 V - *6.2 V *8 to *1 V *7.6 *2.4 V ****5 V *1 to *0 V
High temperature protection RTH3 **0 c - **0 - c fan starting, or **0 c - **0 c or less fan closed, or **0 c - **0 - c to cut off the output
The temperature coefficient of plus or minus 0.*3% / ℃ (0 ~ *0 ℃)
Start, rise, keep time **0 ms, *0 ms, *0 ms
Extent of *0 ~ **0 hz, *0 min, 2 g / 1 cycle, *0 points, each axis
Pressure resistance between input and output: 1.5 KvAC input and shell;1.5 KvAC output and shell;0.5 KvAC
Isolation resistance between the input and output, the input and the shell, the output and shell: **0 VDC / **0 m Ω
Working temperature, the humidity - *0 ℃ + *0 ℃, *0% ~ *0% RH (can be in - starting under *0 ℃)
Storage temperature and humidity - *0 ℃ ~ + *5 ℃, *0% ~ *5% RH
Overall dimensions **5 x **5 x *0 mm
Weight is 0.**8 Kgs
Safety standards UL***2 TUV according to the ****0 (IEC**0, UL***0) certification
EMC standard design meet the FCC part *5 j condition grade A
Three, matters needing attention:
1, check prior to power connection voltage is in accordance with the requirements.
2, power supply automatic short circuit protection, turn off the output.
3, power supply before use should be good grounding, then place on the left side of the terminal 3 feet.