详情
Specifications:
1. Power Supply: AC**0V ± *0V, *0Hz / AC**0V ± *0V, *0Hz
2. Power Consumption: **0W/*4V
3. Temperature: **5 to *0 degrees
4. Humidity: <*5%, without concretion
5. Passage Width: <=***0mm
6. Passing Speed: *0 persons/min (normal open), *0 persons/min
(normal close)
7. Arm Open/Close Time: 2.5s
8. Input Interface: **2V electrical signal or impulse signal
with width more than **0ms, drive current >*0mA
9. Communication Interface: RS**5 (Distance: <=***0m)
*0. Material: Housing - **4 stainless steel Arm - Acrylic/stainless
steel
*1. Dimension: **8****0mm Arm Length: Acrylic arm
<=**0mm
stainless steel arm <=**0mm
*2. Weight: *0kgs
*3. Working Environment: Indoors or outdoors with shed
*4. Arm Turning: Single direction or Bi-direction
Functions and Features:
1. Problem-self-checking function.
2. Many options of working ways: bi-direction card reading; one
direction cards reading and another no reading; one direction card
reading and another freely. And single direction photocell
controlled passing and close. Working ways can be set in the
control panel.
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from ***0s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass
within regulated time period, full-height turnstile will cancel
this passing right. And the regulated time period for passing can
be set by managers.
6. If passenger pass without card read or valid card read, flap
barrier will alarm untill passenger get back from the flap barrier
and then take a valid card to be read for passing.
7. Swing barrier is with **5 interfaces for long-distance control
concern.
8. Anti-rush function: if there is no open single, arm will be
holding tightly.
9. Double anti-clipping function: photocell anti-clipping and
mechanical anti-clipping. When passenger is going through the swing
barrier, photocell will detect out this situation and will
not close. After passenger passed, arm will close
automatically. During its reposition, if arm meets any obstacle,
arm will get back automatcially or stop working for a while with
very slight force. Also it will alarm.
*0. Swing barrier is with standard electrical interface for the
integration of various readers and writers.
*1. Swing barrier can count how many passengers has passed and will
show it in the LED display.
*2. Direction display to guide passenger which direction is to
go.
*3. Card-reading with memory or without memory function.
*4. Swing barrier can control the population inside in the control
of software.
*5. Stable running with little noise.
