1.
Factory
1.Workshop: greater than 28 meters in length , 3 meters in
width , 4.5 meters in height.
2.Power supply: 380V four line, the meter load greater than
80A.
3.Source: 1200P above
2.
Characteristic
This machine adopts the most advanced Swiss composite
technology and improve the degree of automation. The process
eliminates products degumming, crimp, from the type of degree
difference characteristics. The function completed a one-time paper
composite, PET membrane type composite technology, has the
characteristics of smooth surface gloss good etc..
The machine is suitable for the production of composite
materials and packaging industry, plastic-plastic, paper-plastic
composite, paper-paper composite and aluminum foil composite
etc..
1.First substrate uses "double photoelectric automatic
tracking" correction unreeling device.
2.Two sets of automatic tension control system respectively
controls before and after the unwinding tension.
3.Pneumatic back press movable scraper sizing.
4.To glue and combined with pneumatic pressure, adjustable
pressure.
5.Divided into six independent automatic oven temperature
control areas, hot air circulation system can be two times the
return air utilization, energy saving.
6.Pneumatic drying oven cover and transmembrane operation
platform, safe operation, simple.
3.
Specification
Maximum working width: 1100mm
Maximum discharge diameter: 800mm
Host speed: 30-100M/min
Working voltage: 380V
Power: 90Kw
Dimension: 15m*2.8m(LW)
Bake Road Length: 12m
4.
Pictures
5.
Configuration
1.Feeding machine
1) Duplex unwinding.
2) The discharge axis uses 3 inches flatulence
axis
3) Tension uses 10kg magnetic powder
brake
4) Using photoelectric deviation rectifying
system
5) Frame structure with steel plate
30mm
2.Traction part
1) Traction composite roller diameter 320mm, chrome
plated surface, mirror.
2) Traction silicon rubber roller diameter
180mm
3) Cylinder 63X150 with regulating valve, pressure
regulating valve
4) Frame with 30mm plate
3.Textured coating
1) Chrome net roller diameter 180mm, surface
treatment, mirror
2) Roller diameter of 150 mm
3) Cylinder 63X150 with regulating valve, pressure
regulating valve
4.Winding part
1) Duplex winding
2) Torque motor 40N
3) 3 inch inflatable shaft
4) Frame with 30mm plate
5.Oven part
1) Form: Longmen arch
2) Oven length: 12 meters, divided into 4 sections,
each section is 3 meters.
3) Oven structure of narrow type wind mouth, oven
proof.
4) Oven liner all stainless steel seamless joint and
air nozzle is made of 1.00mm stainless steel, the external uses
1.2mm galvanized plate. Electric mode: electric heating, each
section with 6 threads radiating pipe (each 2kW), a total of
24.
5) The oven guiding Kun all static and dynamic
balance process, using the double groove ball
bearing.
6) Oven fan uses worm type strong wind machine 4 sets
1.5kw.
7) Exhaust fan uses worm type strong wind of 1
2.2kw
8) Insulation layer: 6 cm asbestos
filler
9) Oven using 14# channel girder
