1.Application of the
line The line is used to extrude loose tube in which
2-12 optical fibers are contained. The extruding material can be
PBT,PE.
2.Line
specification 2.1 Optical fiber
pay-off (with
release static system) 2.2 Gel filling and bubble remover
device
The device is similar
with Nextrom's machine The first-degree gear
pump draws gel to sealed can of bubble remover device. The jelly is
drawed into sealed through many tiny pinholes, to break the bubble.
And vacuum unit draw bubble out of sealed. The second gear pump
driven by a AC servo motor draws gel to filling can from sealed can
of bubble remover device. 2.3 Extruder SJ50×30 and one cross
head
2.4 Color Master batch Compounder
2.5 4+4M hot trough 2.6 Constant temperature water tank
2.7 Single wheel E.F.L capstan
2.8 8m cooling trough
2.9 Cooling water tank (with refrigerating device)
2.10 Blow dryer device
Adopting HALF
structure. easily operate . Special designed for loose tube. with
noise rejection device .with a bracket which avoid loose tube
shaking. compressed air
blew-dry. four blew-dryer 2.11 Diameter control system
2.12 800 Capstan(with
tension control device)
2.13 Accumulator type tension controller
2.14 Full-automatic double spooler(with one set of Anti static
device ) The take-up is copied to Nestrom.
2.15 Electrical control system
