详情
BT***1/**2 Ink
Remover
(Special for Knitting Bag)
Introduction:
BT***1/**2 is a liquid for removing any color of PP and PE
materials with no temperature
needed. It was tested based on the printing ink on any film bag
both at home and abroad. It
can fast and effectively clean the superficial printing ink and
other smudge causing
environmental pollution on the surface of recycle PP Knitting Bag
and return the clean and
white color of material.
Advantages:
1. No contents of hazardous material such as phosphorus and nitrite
etc.
2. No need to give temperature for saving energy with low
processing cost.
3. It is good for mass production for its fast clean, as it only
need 0.5 hour under *0 ℃ for
BT***2 or 1hour under 5 ℃ for BT**1 .
4. It can be applied universally both for whole bag or crashed
pieces.
5. No much more equipment needed.
6. It is designed with no hazardous materials and the waste water
has no pollution.
Performance Index:
Adaptation Scope:
For PP Knitting Bag superficial printing ink elimination.
Application Method:
Shakes up the package of BT***1/**2 first.
Put the bag or materials to soak the BT***1 cleaning liquid and to
add water in ****0 time,
and take them out after 1 hour. Then should be dried, crush and
washing. If any bag not
( 项目) Item ( 指标) Standard
PH Value (值) 6.**8.0
(气味) Odor No odor
(相对密度) Relativedensity 1.*3±0.*5
(铅) pb ≤1mg/kg
(砷) As ≤1mg/kg
(贡) Hg ≤0.*5mg/kg
(镉) Cd ≤0.1mg/kg
(六价铬) Cr
６＋
≤0.5mg/kg
cleaned enough, just put them into BT***1/**2 cleaning liquid again
to clean them second
time.
If the cleaning liquid level drop down, supplements of new fluid
needed then.
Dosage:
Proportion of BT***1/**2 and water: 1:*0 for PP knitting bag. Add
**3% caustic soda
according to total quantity of water and BT***1/**2 liquid.
Matters Needing Attention:
1. this product should be stored in evades the light place
coolly.
2. Splashes carelessly into the eye, please use the massive clear
water to flush.
3. The gummed glove needed when works.
Packing:
*5kg/plastic drum.
(End. 脱墨剂 PP 编织袋 专用 )
