离岸价格
获取最新报价30000 ~ 600000 / Set ( Negotiable )
|Minimum Order
位置:
-
最小订单价格:
最小订单:
1 Set
包装细节:
no packing
交货时间:
45 days
供应能力:
30 Set per Year
付款方式:
Money Gram, Western Union, L/C, T/T
联系人 Mr. Shing
Zhenggang Road, Cangzhou, Hebei
Model | **4mm×*0mm | Date | 9th Jan | Term of validity | *0 days | Duration | *0 Work Days |
Size L*W*H m | *8*1.8*1.8 | Weight | About *6T | Working scope | ******4**0mm carbon steel pipe with Max length *2mm,Bending radius3 D to 8 D | ||
The Main Technical Parameters of The
Pipe Bending Machine 1、 Master cylinder: OD:**9mm, inside diameter:φ**0mm diameter of the rod:φ**0mm effective stroke: *1 m the max thrust of the 2 cylinders **0T The other small cylinders:φ**5mm *2 pieces(for clamping) 2、 Hydraulic pump station a、station configuration: *5scy plunger pump 1 set、 7.5KW Motor 1 set ( to converse frequency adjust the speed of the master pump) CB***0 gear pump 1 set、*5KW Motor 1 set ( fast forward and backward,). *0scy plunger pump 1 set,*1kw motor 1 set (to guide clamp wheel、fixture motor) The working speed ; ***0cm/min , the maximum returning speed:**0cm/min 3、The guiding part of the main machine is controlled by four wheels, the pushing board moving on the dovetail groove guiding rails. the clamp holding different size run By the hydraulic motor, it open and closed driven by the oil cylinder, the oil cylinder drive the rocking arm to adjust the bending radius. 4、Medium—frequency power supply (SCR): power:**0kw. Quenching transformer: ***0kva. 5、the total power of the machinery: *5KW,**0V or **0V,*0or*0HZ. 6、Assembly parts a、clamp wheel、fixture made of *5# cast steel b、master fuselage、weldment、the main pushing board are welded board c、screw、chain、standard parts and bearing are national standards d、the guider is dovetail groove slide plate mode |
|||||||
The works and the scope of supply of
the supplier 1. Design and manufacture pipe bending machine 2. Guide to install the equipment as the equipment arrives at the factory of buyer 3. Debugging and test run the equipment (three technicians to the buyers factory) 4. Main machine part, hydraulic pump station, heating system. 5.Φ**4,Φ**2mm,**0mm,**8mm,**7mm,**6mm,**4mm,**9mm clamping device: 1 piece for each size. Φ**4Φ**2mm,**0mm,**8mm,**7mm,**6mm,**4mm,**9mm induction heating coils: 1 piece for each size. 6. The equipment foundation drawing, hydraulic principle drawing, electrical diagram, each with 1 copy 7 spare parts for the machine and the heating device B Optional items 1 Microcomputer part(PLC)(****0 USD) Uses Hengstler or Omron encoder to measure oil cylinder speed, In a real-time display,Can also be used for setting the stop when get to a certain distance and set in place after the stop. The angle encoder calculates the bending angle and show on the screen, the bending angles should be preset. Intermediate frequency sensors can be combined with programming system, Through the thermometer and the speed encoder adjust the bent pipe temperature, speed, hydraulic valve to the set temperature, after that the oil cylinder driving steel pipe bending forward, speed mate to the temperature, when bend to the set angle, the intermediate frequency and the master machine stop. Touch screen is Taiwan Weilun 7 inch colorful LCD, Siemens series is used in the programming system. Infrared thermometer is U.S. Reitek thermometer, Temperature range: **0****0℃ |