6 ports Gigabit Ethernet Switch with 2 fiber 4 Ethernet

详情

Specifications

6 ports Gigabit Ethernet Switch with 2 fiber 4 Ethernet
SFP Gigabit Media Converter
***0M SFP fiber Ethernet
AC DC power

6 ports Gigabit Ethernet Switch is also called 2 fiber 4 Ethernet SFP media converter has four*0/**0/***0M UTP ports and two ***0M SFP sockets. Customer can

choose different ***0M SFP module according as his demand, such as ***0Base-T,***0Base-SX or

***0BaseLX etc. The product is possessed of stable performance, excellent quality and reasonable price with

adopting latest IC from USA. It is applicable to use in constructing of Optical Fiber Ethernet.

Main features

• *-Port *0/**0/***0 Mbps GbE Switch
• Four *0/**0/***0M UTP ports and two ***0M SFP ports
• Auto negotiation function supports UTP ports to auto *0/**0/***0M and Full Duplex/Half Duplex.
• Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
• The SFP slot supports ***0M and Full Duplex mode.
• Supports IEEE **2.3x flow control and broadcast storm protection.
• Supports VLAN and QoS.
• Supports max *0K bytes frame.
• It is low power consume (4W), low heat, and good reliability.

Technical Specifications

• Operating standards: IEEE**2.3/u/z/ab,*0/**0/***0Base-T and ***0Base-SX/LX
• MAC address table: 1K
• Frame buffer memory: 1MKb
• Switching capacity: *2G
• Connector: UTP: RJ**5,*0/**0/***0Mbps SFP slot: ***0Mbps
• Cable: UTP: Cat.5 or 6 UTP(the max distance up to **0m)
• Multimode Fiber: *0/**5,*2.5/**5μm(the max distance up to **4/**0m)
• Singlemode Fiber: 8/**5,8.7/**5,9/**5μm(the max distance up to *0~**0 km)
• Flow control: Full Duplex: IEEE**2.3x flow control
• Half Duplex: back pressure flow control
• LED: PWR, F1 Link/Act,F2 Link/Act TP1~TP4 Link/Act,TP1~TP4 **0,TP1~TP4 ***0
• Power Requirement: AC**0V(******0V),*0~*0Hz DC: 5V,2A
• Ambient Temperature: 0 ~ **0°C
• Storage Temperature: **0 ~ **0°C
• Humidity: 5% ~ *0%