Current/Voltage signal isolated splitter(one in two out)

详情

Selection Guide Samples:
1.Input:**5V      Power Supply:*4V  Output:two ***0mA    Type No.: DIN*2 IAP- V*-P*-A4
2.Input:***0V    Power Supply:*4V  Output:***0V/***0mA Type No.: DIN*2 IAP-V*-P*-V2A4
3.Input:***0mA Power Supply:*4V  Output:two ***0mA     Type No.: DIN*2 IAP- A*-P*-A4
4.Input:***0V    Power Supply:*4V  Output:two ***0V       Type No.: DIN*2 IAP V*-P*-V2
 

***0mA/***0V signal isolated splitter/isolated amplifier,DIN*5 Rail-mounted

Features:
>>One input two output
>>Accuracy *********- 0.1%, 0.2%
>>Isolation *********- signal input / output / auxiliary power 
>>One standard signal input: **5V / ***0V/**5V, ***0mA / ***0mA/***0mA
>> Two standard output signal: **5V / ***0V/**5V, ***0mA / ***0mA/***0mA
>>Dimensions: **6.7x*9.0x*5.0mm
>>Auxiliary power supply*********- DC5V(± *0%), *2V,*5V, *4V(***2VDC)
>>Insulation resistance *********- ≥ *0MΩ
>>Operating Temperature **********- *5 to **0 ° C
>>Pressure *********- signal input / output / auxiliary power
>>Operating Humidity *********- *0 ~ *0% (no condensation)
>>Storage Temperature **********- *5 ~ **0 ℃
>>Impulse withstand voltage *********- 3KV, 1.2/*0us (peak value)
>>Storage humidity *********- *0 ~ *5% (no condensation)

   WAYJUN this product uses advanced isolated technology, quarantine inspection / monitoring DC voltage signal, small size,low power,high accuracy. Input/output/auxiliary power supply three isolation.Widely used in such fields as electricity, chemicals, petroleum, industrial and automatic control. 
Products Absolute Maximum Ratings:
Continuous Isolation Voltage: ***0VDC
Junction Temperature: **5 ° C
Storage Temperature: ***0 ° C
Lead Temperature: ***0 ℃ (*0 sec)
Note: If you exceed this range, the product may cause permanent damage.
General parameter:
Note: All specifications measured at TA=*5°C, humidity<*5%, nominal input voltage and rated output load unless otherwise specified.
Input parameters:
Input item Input impedance Power Loss Input over load
**5V
***0V
≥**0KΩ 2.0 times Rated: Continuous
**1mA 1KΩ
***0mA
***0mA
***0mA
TYP.:**0 Ω
Or user-defines
Vout<0.6W,Iout<1.5W
1.5 times Rated: Continuous
3.0 times Rated:1S
Input parameters:
Output item Input over load Response time
***0mA
***0mA
***0mA
≤**0Ω(If need others, such as **0Ω, please note or
choose our large current products)
**5V
***0V
**5V
> 2KΩ
≤1mS
Parameter Condition MIN. TYP. MAX. Unit
Impact voltage 3KV， 1.2/*0us(peak value)
Isolation Input/Power Supply/Outpu
Isolation voltage
*0Hz,1minute,leak
current :1mA
***0 VDC
Operating Temperature **0 **5 Deg.C
Storage Temperature **0 **5 Deg.C
Operating Humidity no condensation *0 *0 %
Storage Humidity no condensation *0 *0 %