详情
WAYJUN
with
Modbus,RS**5/**2 to Analog Current or Voltage Signal Converters,D/A
Converter
Product Overview:
The WJ*1 series realize host RS***5/**2 interface signal isolation
converted into a standard analog signal, to control
the remote device. WJ*1 products can be applied to RS***2/**5 bus
industrial automation control system,***0mA /
**5V/***0V standard signal output, to control industrial site
execution set equipment, control equipment and display
instrument.
Products include power supply isolation, signal isolation,
linearization, D/A conversion and RS***5 serial
communication. Each serial interface can connect up to **6 pieces
WJ*1 Series modules, communication using ASCII
code or MODBUS RTU communication protocol, and its instruction set
compatible with the ADAM modules, baud rate
can been set by the code, with other manufacturers control module
hang in the same RS***5 bus for easy programming.
Product Selection:
WJ*1 □ U(A)□
Interface Output Voltage or Current Signal
**5:Input is RS***5 interface U1：**5V A1：**1mA
**2:Input is RS***2 interface U2：***0V A2：***0mA
U3：***5mV A3：***0mA
U4：**2.5V A4：***0mA
U5：*-±5V A5：*-±1mA
U6：*-±*0V A6：*-±*0mA
U7：*-±**0mV A7：*-±*0mA
U8：user-defined A8：user-defined
Sample 1: part No.:WJ*1 ***-A4 Input is RS**5 interface, ***0mA
signal output
Sample 1: part No.:WJ*1 ***-U1 Input is RS***2 interface ,**5V
signal output
Features：
>>DIN Rail-mounted
>>RS**5/**2 to ***0ma/**5V analog signal
output
>>**-bit
DA converter,analog
signal output accuracy>0.2%
>>Can be remotely reconfigured for modules
accuracy
>>Three-port Isolation: ***0VDC
isolation.
>>Wide power supply range:8~*2VDC
>>High reliability, easy program,
installation.
>>Can program setting module address, baud
rate
>>Support Modbus RTU
