Hardfacing flux cored wire HGD8253

详情

Flux cored wire for hardfacing



 

~Flux cored wire for hard facing 

Name of Wires:          Flux cored wire type HGD***3  

Flux cored wire Item No.:  TC3D***3      

Executive Standards:       Manufacturers standards ; 

Description of wires and Application:    
Hardfacing and repairing for fan liner and blower wheel liner;
This flux cored wire is designed for hardfacing on the surfacing of fan wheel liner.
the cladding welding layer is abrasion resistant and anti corrosion when the fan is any working conditions.

The cored flux is including the Cerametal alloy, Carbide Chrome alloy, Ferro alloy powder and etc. Also, the welding layer is hardness and good abrasion and high temperature resistance.

This is a new welding wire for blower fan industry.
The welding bead is smoothly and without cracks.        

Advantage of over layer:           
The flux coed wire advantage is including the Welding ARC table, the good bead appearance, easy for striking ARC, lower smoking and welding spatter.
Many hard facing layers is available and no cracking on the surfacing.
Chemical components : w. t.percentage: 
C: 0.1 to 0.*5pct;
Cr: 6 to*5pct;
Mo: 1 pct;
Mn: 1to 2 pct;
Si:   1;
Others: Alloy powder;
Hard facing layer hardness:  HRC *0;  
Diameter of wire:         1.6mm 
Packing and Package:  *5KG per Plastic Spool with PET inner bag and Box. 
Spool Size: Outer Diameter:  **0mm; Refer to picture 
Application and Instruction:  Welding Current  : **0 to  **0A;
                          Welding Voltage : *5 to *0V;
MIG Shielding Gas:         CO2 Gas shielded MIG;