BOSON Abrasives is
a proffesional supplier of sintered and electroplated diamond
honing tools for progressive honing. Honing tools diameter from 6mm
to *0mm.
Progressive Honing
The progressive honing sequence is very simple and does not require
the presence of any skilled operators, it consists of a number of
vertical honing tools, combined with a horizontal table which
index/rotates under the spindles.
Progressive Honing
Sequence
Each honing tool is preset to a progressively larger diameter, and
as the workpiece passes through the machines cycle it has its
diameter increased in size by each spindle in turn. Each honing
tools passes through the bore one single time only. At each pass
the tool removes a specific quantity of material and the bore
diameter is progressively increased, calibrated and finally
finished step by step.
According to the material, the stock removal, the surfance finish
and the required geometry, the honing range can include 1 to more
than *0 honing tools.
Constant quality of the bore
Cylindricity< 0.*1
Surface finish< 0.*5
Short cylcle time
Process reliability,
Low workpiece cost.
Application areas:
Hydraulic valves, distribution valves, Gears, ABS, brake cylinder,
supercharger, rocker arms, connecting rod, crankcase
etc.
