详情
Features:
High productivity:
High feeding speed.
Multistage in each stroke.
High speed:SPM**0.
Universal:Easily adjustable for different thickness And width
material.
Practical and economical with simple mechanism.
Easy maintenance with little error.
Feeding Accuracy:
Depending on feed length of stock and stroke of press,the general
accuracy of the machine is within 0.*5mm and would be as accurate
as 0.*1mm by pilot pin with automatic positioning system.
Type:
Single Type:for cutting stock at certain length or coiling back the
finished products.
Double Type:for there is any stuff left after stamping,and for
short or thin stock.
Mechanism Features:
One Direction Clutch
Made of tungsten carbide steel on the contacting surface to Keep
rigidity,precision and durability.
The gear is hardened to HRC*0 o and ground to the best Transmission
accuracy.
Rooler
High feed accuracy at exact positioning with hollow roller of less
weight,and lower inertia.
Disk Brake
Apply the advanced brake lining to have accuracy,durability,and
rigidity.
The Anti-reversing Device
The structure is the same with the one way clutch.It can precisely
control the lower roller which will not reverse even in long time
using.It is stable and precise.
The brakes will be not out of control by the splashed waste oil
when it is punching otherwise the lower roller will reverse and
transfer distance will be imprecise.
It will not caues high heat.
Durable with super hard carbide surface and rollers.
The acting rorm of the rollers is circular movement,unlike the four
guides moving in Straight line,so it will not stuck.
As less friction it will ocurred,the torsion needed will be
correspondingly less.And the Transfer structure will not easily
wear out.
Speed can reach *0M/min if the anti-reversing device is fitted
.Generally it is *0M/min.
Its special structure can increased it is using life.
