* Medical Orthopedic Fiberglass Synthetic Casting
Tape * *3
years professional manufacturer * FDA CE
Certification * Various
Colorsto Choose * ***5 Working Days for
Delivery * Free Samples Offered
forQuality
Test
Welcome to contact
us Sales: Elsa
Lee Skype:
elsa.lee.lf Tel:
**************8 Mob:
**************6(WhatsApp)
Description &
Properties Ansen Medical Orthopedic Fiberglass Casting Tape is made of
knitted fiberglass fabric or
polyester fabric, and water activated
polyurethane resin. It uses environmental friendly materials. This
new technology allows the products have
manyobvious advantages that can weight out
of the traditional plaster of
paris.
Material: fiberglass or polyester
fabric Application: it is mainly used for the external
fixation of fracture or sprain to make the bone heal in
orthopedics, plastic surgery and general
surgery.
Core Advantages High Strength, Light Weight: More than *0 times
harder,1/5weight
of the traditional plaster
bandage. And easier toget cut.
Molding Fast: It begins to mold in **5 minutes
after open the package and could bear weight after *0
minutes,whileplaster bandage need *4 hours
for full concretion.
Good Air Permeability: Unique knitted net structure to make the
bandage many holes in the surface to keep good air ventilation and
prevent skin damp, hot
or itchy.
Excellent
X-ray Radiolucency: It isconvenient
to take X-ray photos and to check the bone healing without removing
the bandage.
Waterproof: The moisture absorbed is *5% less than
plaster bandage, even on the situation of the patient touching
the water, taking a shower, it still can keep dry in the
injured part.
Environmentally Friendly: Material are environmental friendly, it
will not produce polluted gas after being burn
down.
Simple Operation: Room temperature operation, short time, good molding
feature.
Usage 1. Wear
the surgical gloves and choose the proper
specifications. 2. Put
the cast padding or stockinet on the fixed
part. 3. Open
the package and take out the cast, Immerse the cast in room
temperature water at **5 seconds and press **3 times, take it
out and squeeze out the excess
water. 4. Wrap
the cast spirally on injured parts with 2~3 layers, overlapping the
previous layer by one-half or two- thirds the width of the
roll. 5. shape according to the need, smooth and rub the surface
to achieve good contact between
layers. 6. Use
the electric cast saw to cut and remove
it.
