silicone primer

Silicone Primer CL**6AB**5 

LSR Silicone Overmolding PC

CL**6AB**5 is applied for bonding platinum addition type silicone rubber with PC,toughened glass ,etc.

Typical application on silicone diving equipments 

Stable Quality 

 3 times repetitive standard tests                                                                                                          

 Making your silicone products *9% ok rates                                                                                                     

                                                   Survive In Rugged Environment

                                                                                          Water resistance, anti-salt mist , 

                                                                                          chemicals resistance, anti-oils, solvent, etc. 

Good adhesion Strength 

No partial bonding failure 

No primer trace on finished silicone products

Color : Transparent Liquid or Gel                

Component：A:Gel , B:Platinum Catalyst

Mixing Ratio: A:B=1:1（Use up within 4hours after mixture）

Storage:6 Months  (*0℃**5℃ avoid light, heat and place in dry area)

1、 Surface Treatment：Chemical treatment with the substrate, remove oil and dust.

2、 Apply The Glue: Mix A and B evenly then apply the primer on the substrates by brusing, dipping , spraying or screen printing

3、 Surface Dry: Heat up with *0℃***0℃ for *0~*5minutes。

4、 Leavy Dry: The primer -coated substrates should be forwarded to moulding process with silicone right in the day and avoid pollution and contact with high temperature and humidity.

5、 Curing:Join the silicone with primer coated substrates and forward to moulding process for hot air vulcanization.
 

1,Keep in dry and shade place and avoid fire and heat  

2,The solvent is volatile, please fasten down the cap after use

3, The steam issued by the solvent is harmful, the working shop should be fireproof and avoid long time inhalation and contact with skins

4, Lightly Cloudy wont affect the performance.

5, While curing, the product should avoid contact with organic compound which contain substance like N, P, S and heavy metallic anionic compounds like Sn、Pb、Hg、Sb、Bi、As and  compounds which contains  acetenyl  Otherwise , the primer will result in bad cure, thus, test for the compatibility of primer with substrates is necessary