Description
: *4v *2a mobility
scooter is automatic smart 3 stage cc cv floating charger. it also
can be used on electric scooter, electric bike, electric forklift
etc ev products, high efficiency and high saturation , safety and
multi protection. It will be good for prolonging batteries\'
lives.
Feature : 1. Aluminum case , light
weight 2. Input voltage ; DC **0 V ~**0 V *0 /
*0 HZ 3. Max wattage : **0 W
4. Color : sliver or black
5. Weight : 1.2kg
6. Size : **0**0**3mm 7. Charge mode : 3 stage ( CC CV
floating mode ) 8. Charging : High saturation and
efficiency 9. Input plug(power cords)
: EU US UK AUS Italy Plugs etc ( can
be Customized) *0. Output Connector
: DC jack, XLR, JST, Cigar Lighter, Alligator Clips
etc
Advantage : 1. full automatic transition of cc cv and
floating /cut-off (cc cv 3 stage charger) 2. Precise limit of voltage& current,
guarantee fully charged and avoid over charger 3. Protections : short circuit, over voltage,
over-temperature, reverse polarity protections, Dc output isolated
from AC input 4. High Efficient : > *5% PFC :0.*6
Eco-friendly 5. Current& voltage display, Two led
indicators Red ( power on ), Red/Green
( charging/full ) 6. Safety and high quality, Advantage high
frequency switching mode power supply technology
7. Certification : CE & Rohs certification
The *-stage mode charging : First stage ( constant current ) : The
charger will supply constant current for the
battery Second stage ( constant voltage )
: The voltage will be rising under the first stage, when it
reach constant voltage value, it will turn into the second
stage. The current will be slowly smaller until it reduce to
floating value,the CV stage will end.
Third stage ( Floating charging ) : When
the current is approaching the value of transition, the
charger will cut down to the given current gradually,
that means the battery power is full and indicator
light turn to green. At this moment, the battery can be
stopped charging or keep on trickle current charging for half
an hour.
Charging Procedure : 1.First output power charger wire ends are
connected to the battery anode and cathode , the charge indicator
turns green, the connection is correct, otherwise the charge in
question, please check the actual situation. 2.Then city power plug to socket , the
indicator is red, charger will be into the charging state
. 3.When the indicator light turns to green, the
battery is charged to *5% , If you want to reach **0% , keep
charging for 1 to 2 hours before end of charge. 4.When fully charged, disconnect the city
power first, then disconnect the battery cable.
For
more information about *4v *2a mobility scooter battery charger or
other battery chargers, welcome to contact us
!
