black two components electronics potting compound silicone for LED PCB and power suppliers

详情

Description of electronics potting compound silicone for LED PCB and power suppliers

Electronic potting liquid silicone rubber is a kind of two components (1:1 or *0:1 mixing ratio) addition cure silicone with good chemical stability, electrical performance, and lasting elasticity at the temperature of **5~**0℃. It has the properties of water proof, ozone proof, weather proof, corrosion protection, physiological inert, non-toxic, tasteless etc. It can be used widely as electronic products potting, life like products and so on.

Features of electronics potting compound silicone for LED PCB and power suppliers:

heat-conducting

low viscosity

Inherent flame resistance

waterproof,dust proof

Good self-leveling

Application of electronics potting compound silicone for LED PCB and power suppliers:

• Applying for the surface of PC (Poly-carbonate), PP, ABS, PVC, Metal, etc.
• High powered electronic encapsulation and DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
 • Insulation, waterproof and bonding of general electronic components.
 • Filling for LED, LCD electronic display, circuit board, wind power generator ,PCB substrate, etc.
Operation of electronics potting compound silicone for LED PCB and power suppliers :
1). Please put part A and part B in separate container and stir evenly before mixing the two part together.
2).Weight Ratio: part A: part B = 1:1
3).Daeration the mixture under *0.1 MPa for 3 minutes.(If no, skip it)
4).The temperature influences the curing time. When in too low temperature (below 5℃), we suggest customers appropriately heat the mixture to accelerate vulcanization.
 

Packing:

*0KG/drum vacuum packing for part A + *0KG/drum vacuum packing for part B

*5KG/drum vacuum packing for part A + *5KG/drum vacuum packing for part B

**0KG/drum packing for part A ***0KG/drum packing for part B