离岸价格
获取最新报价5.6 ~ 6.8 / Kilogram
|Minimum Order
位置:
-
最小订单价格:
最小订单:
200 Kilogram
包装细节:
1KG /2KGS /5KGS /10KGS /20KGS /25KGS /200KGS /drum
交货时间:
3 days after payment
供应能力:
120 Ton per Month
付款方式:
T/T, L/C, Western Union, Money Gram, PayPal
联系人 Ms. Sunny
Changan, Dongguan, Guangdong
1.Description of Shoe sole molding silicone rubber raw material
C***5 silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
2.Characteristics of Shoe sole molding silicone rubber raw material
-An exceptional fluidity and good operability, easy to remold
-Cures at room temperature within **4 hours
-Good tensile and tear strength, low shrinkage
-Good resistance to weather, temperature, aging, acid
3.Application of Shoe sole molding silicone rubber raw material
Shoe soles mold, pouring mold, sand casting.
4.Datesheet of Shoe sole molding silicone rubber raw material
| Item No. | Appearance | Hardness (shore A°) | Viscosity (CPS) | Tensile-strength( kgf /cm2 ) | Tear-strength (kgf /cm2 ) | Elongation-break(%) | Mixing ratio | operation time (*5 ℃ ) | Curing time( *5 ℃) | shrinkage |
| C***5 | White | *5±1 | ****0±***0 | ≥*1 | ≥*2 | ≥**0 | **0:3 | ****0 mins | 2~3 h | ≤0.3% |
5. Using instructions of Shoe sole molding silicone rubber raw material
Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of **0g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed,put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Using Note:
The product is used for pouring or brushing technique.That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon,mix the silicone rubber and the curing agent evenly according to the mixing ratio of **0 : 2 and pour them onto the sole model,then brush evenly with a wooden plate or a brush,and fill up the mold frame with gypsum after the silicone rubber is dried.
