Reinforced kevlar Edge Corrugator Belt

详情

Specifications:
Material: Synthetic Material
Thickness: 9mm
Width range: ***0mm - ***0mm
Heat resistance :**0℃, edge upto **0℃
Weight : 7.5kg/㎡
Suitable speed：≥**0m/min 


Feature Of Reinforced kevlar Edge Corrugator Belt
1. Suitable as top belt with high speed (above **0m/min ) production
2. Heat and Super tear resistance
3. Inwoven Aramid edge to reinforce the belts ,reduce wear substantially and ensure a longlife time .
4. Particularly for frequent changes of board width
5. More Popular in the all corrugators plant.


How To Cleaning Maintenance Of Corrugator Belt?
It is better to thoroughly clean  the corrugator belt once time per month.

Here are some detail steps:

1. Keep the machine running with slow speed;

2. Make the corrugator belt fully moist by water or low pressure steam spray with 
much water content;

3. Put into some detergent and clear up the dirt & paste scar with soft brush; 

4. After cleaning,using water to wash the belt again;

5. During the washing process,it will be greatly help to lay out shallow U-shaped
iron plate or shallow groove under the corrugator belt.It will make the cleaning 
water flow out to the machine outside,keep the heating panel clear and no 
any corrosion;

6. When necessary, you can turn on steam to heat the heating panel and make the 
wet corrugator belt drying with slow speed.