VoIP emergency call station, stanless steel housing one push to call emergency telephones,

详情

Overview of VoIP emergency call station PT-IPT1
PT-IPT1 supports SIP protocol, providing an RJ**5 network interface, this interface supports *0 / **0Mp Ethernet.  two power input interface, one is 5.5 * 2.1mm DC socket, another is pluggable terminal (automatically identify the positive and negative).

The single button indicator has three colors (red green blue). when pushing the emergency call button, a preprogrammed number from ***1 will be automatically dialed and red/green/blue LED light will provide visual indication of call progress. if auto answered, the indicator will be on, until the call ends the indicator will goes off.

Long press the emergency call button for *0 seconds, then release, emergency phone will voice broadcast IP address.


Main features of VoIP emergency call station PT-IPT1

• Clean and simple interface with backlit button
• Wall mounting and embedding two ways for installation.
• Anti - disassembly screws, vandal resistant 6 mm thick aluminum alloy faceplate
• **6 marine grade stainless steel call button
• Weather protection to IP*7
• Supports standard SIP protocol, compatible with various softswitch systems and VoIP voice gateways to provide broadband IP voice service.
• Configuration and firmware upgrades through Web GUI
• Supports IP address point-to-point call
• Supports 5 SIP Lines
• Supports DTMF detection
• Auto-answer allows security to monitor and initiate calls with the unit
• Power over Ethernet (PoE, **2.3af), *2V DC

Applications